rpi-rgb-led-matrix icon indicating copy to clipboard operation
rpi-rgb-led-matrix copied to clipboard

Published 20 hours ago • verified publisher icon hzeller

64x64 panel, every pair of lines are blank

Open Tenumen opened this issue 1 year ago • 2 comments

Hi there Would someone be able to point me to what is wrong with my setup and causing this issue where two lines are working then the next two are blank? image I am using an unnamed panel with E but no D channel. I obtained this pattern by running the Plasma Pattern example with only the pin-outs changed. I am using an ESP32-WROOM Dev board connected directly to the panel via a simple breadboard -so I am sending 3.3v signals to the panel. image Any guidance that someone can offer me would be much appreciated. Thanks

Tenumen avatar Aug 06 '24 18:08 Tenumen

This project is using a Raspberry Pi, not an ESP32.

hzeller avatar Aug 06 '24 20:08 hzeller

Oops sorry! I've been looking at both yours and https://github.com/mrcodetastic/ESP32-HUB75-MatrixPanel-DMA and got the two mixed up.

Tenumen avatar Aug 07 '24 09:08 Tenumen