minifabric
minifabric copied to clipboard
hyperledger-labs
Issue of caliper
My caliperbenchmarkconfig.yaml
When the Send Rate (TPS) is not increasing. I set it at 80 in the yaml setting but result is still 13.
it is not a caliper issue. I used modified fabcar chaincode to test a variety of test cases.I'm able to get a send rate of 23.5. I initially experienced a low send rate as well, but I noticed that if I reduce the transaction load, the send rate also falls. Also it depends on channel config file too.You can try running different round with higher transaction load.i.e 100,250,500,1000 ..etc.
I changed into the fixed-rate and change the tps into 100, but it will go into the infinite loop and not generate the result.
Just observations in your caliperbenchmarkconfig.yaml file. the txNumber key is optional , may be because of this it is going in infinite loop.Also you are not giving txDuration basically it is for 60 seconds. just see following benchmark configuration.
May be ur are working on different minifab version .I have pulled latest branch. below benchmark config i am using. There are few difference what im using.