HAOS 12.4 install created on Windows 10+ fails to boot on RPi 5

[BatuhanBasaran]

Describe the issue you are experiencing

The SD card was flashed with the RaspberryPi Imager 1.8.5 and for test purposes with BalenaEtcher. I used the following image with BalenaEtcher: https://github.com/home-assistant/operating-system/releases/download/12.4/haos_rpi5-64-12.4.img.xz

Unfortunately the Pi5 is stuck in the boot menu. No matter if with the RaspberryPi Imager or with BalenaEtcher.

Finally I downloaded haos_rpi5-64-11.5.img and flashed it. This works perfectly on the Pi5.

What operating system image do you use?

rpi5-64 (Raspberry Pi 5 64-bit OS)

What version of Home Assistant Operating System is installed?

12.4

Did the problem occur after upgrading the Operating System?

Yes

Hardware details

Raspberry Pi 5 with 8GB Ram

Steps to reproduce the issue

1.Flash HAOS 12.4 on SD-Card 2.Boot the Pi5 with the SD-Card 3. ...

Anything in the Supervisor logs that might be useful for us?

-

Anything in the Host logs that might be useful for us?

-

System information

No response

Additional information

No response