Missing sensor-temperature outdoor

[RaiberF]

Feedback

Under the Entitäts-ID sensor.aussentemperatur is shown the temperature in the heat pump. The temperatur of the "Entitäts-ID" sensor.aussentemperature is a temperature, that you can find in the Smartset under "Fachmann/Heizgerät" in the Register Heizgerät in the category "Außentemperatur"

The temperature, relevant for controlling is the "Entitäts-ID" sensor.gemittelte_aussentemperature. The base of this temperature is the temperature at the probe sensor and this is not included in the integration yet. Can you add the temperature of the sensor probe? You can find this value in the Wolflink-16b Smartset under "Fachmann/Bedienmodul BM-2 0" in the register "Einstellungen und Anzeigen" in the category "Einstellungen und Anzeigen" with the name Außentemperatur. Please integrate this value addituinally to the "Entitäts-ID" sensor.aussentemperatur

You have made a good integration - Thank you for the good work!

URL

https://www.home-assistant.io/integrations/wolflink/

Version

2024.10.2

Additional information

No response

### Tasks

[home-assistant[bot]]

Hey there @adamkrol93, @mtielen, mind taking a look at this feedback as it has been labeled with an integration (wolflink) you are listed as a code owner for? Thanks!

Code owner commands

Code owners of wolflink can trigger bot actions by commenting:

• @home-assistant close Closes the feedback.
• @home-assistant rename Awesome new title Renames the feedback.
• @home-assistant reopen Reopen the feedback.
• @home-assistant unassign wolflink Removes the current integration label and assignees on the feedback, add the integration domain after the command.
• @home-assistant add-label needs-more-information Add a label (needs-more-information) to the feedback.
• @home-assistant remove-label needs-more-information Remove a label (needs-more-information) on the feedback.

[EnjoyingM]

@RaiberF Can you provide me a debug log? It looks like a mapping issue as I have it in my system which device are you using?

[EnjoyingM]

@home-assistant add-label needs-more-information

[RaiberF]

Hello Thank you for your response. My problem is: I see in my Smart Home Assistant system at the moment 9,5°C from the entity sensor.aussentemmperatur You can see here in blue the entity "sensor.aussentemperatur" an in yellow/brown "sensor.gemittelte aussentemperatur" [image: image.png] The shown outside-temperature 9,5°C and the middle-value is 7,4°C. The average in yellow/brown is allways less than the actual value and this can not be correct (my integration time ist 3 hours)

With the App Smartset from wolf under "/Fachmann/Bedienmodul BM2-0 in the register "Einstellungen und Anzeigen" in the category "Einstellungen und Anzeigen" [image: image.png] Here i see an outside temperature of 7,6°C. The shown value ist 9,5°C and the correct value seems to be 7,6°C.

Also with the App Smartset from wolf i see under "/Fachmann/Heizgerät in the register "Heizgerät" in the category "Einstellungen und Anzeigen" [image: image.png] Here i see an outside temperature of 9,6°C (some minutes later)

It looks for me, that the integration shows under sensor.aussentemperatur the outside temperature in the heat pump and not the outside temperature at the sensor. My inegritation from wolf cha 10 shows 59 entities. Can you integrate also the outside temperature of the explizit sensor to and not only the outside temperature in the heat pump?

Franz Raiber

Am Sa., 12. Okt. 2024 um 10:55 Uhr schrieb EnjoyingM < @.***>:

@home-assistant https://github.com/home-assistant add-label needs-more-information

— Reply to this email directly, view it on GitHub https://github.com/home-assistant/home-assistant.io/issues/35188#issuecomment-2408464499, or unsubscribe https://github.com/notifications/unsubscribe-auth/ATQUF3F2RPAIYOKWPPD2S3LZ3DPXPAVCNFSM6AAAAABP2E56E2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDIMBYGQ3DINBZHE . You are receiving this because you were mentioned.Message ID: @.***>

-- Liebe Grüße - Franz

[EnjoyingM]

Hi @RaiberF I need a debug log to see what's going on. Can you please provide one as it will show the parameters mapping. I think your device is not on the supported list. The "Fachmann" variables are not supported the integration only supports the user variables currently. What is your device model? I don't think it formally supported with the debug log I can look if I can make it supported

[RaiberF]

Ich don't know, where i can find in smart home assistant a debug protocol. My heatpump is a Wolf CHA-10

Franz Raiber

Am Mo., 14. Okt. 2024 um 10:19 Uhr schrieb EnjoyingM < @.***>:

Hi @RaiberF https://github.com/RaiberF I need a debug log to see what's going on. Can you please provide one as it will show the parameters mapping. I think your device is not on the supported list. The "Fachmann" variables are not supported the integration only supports the user variables currently. What is your device model? I don't think it formally supported with the debug log I can look if I can make it supported

— Reply to this email directly, view it on GitHub https://github.com/home-assistant/home-assistant.io/issues/35188#issuecomment-2410402347, or unsubscribe https://github.com/notifications/unsubscribe-auth/ATQUF3FV3624B4OMOUD56STZ3N5CNAVCNFSM6AAAAABP2E56E2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDIMJQGQYDEMZUG4 . You are receiving this because you were mentioned.Message ID: @.***>

-- Liebe Grüße - Franz

[EnjoyingM]

Ok that device is currently not supported but I'm happy to take a look but will need the debug logging. If you go under Settings -> Devices & Services -> Wolf SmartSet Service -> Enable Debug logging than have it run for 5 minutes. Then turn the Debugging off and you get a file.

Other option is using the ISM7 Addon https://github.com/b3nn0/hassio-addon-ism7mqtt This does support your device but but it uses mqtt to integrate into home assistant

[RaiberF]

Now i have a Debug-Logging

Am Mo., 14. Okt. 2024 um 13:08 Uhr schrieb EnjoyingM < @.***>:

Ok that device is currently not supported but I'm happy to take a look but will need the debug logging. If you go under Settings -> Devices & Services -> Wolf SmartSet Service -> Enable Debug logging than have it run for 5 minutes. Then turn the Debugging off and you get a file.

Other option is using the ISM7 Addon https://github.com/b3nn0/hassio-addon-ism7mqtt This does support your device but but it uses mqtt to integrate into home assistant

— Reply to this email directly, view it on GitHub https://github.com/home-assistant/home-assistant.io/issues/35188#issuecomment-2410883857, or unsubscribe https://github.com/notifications/unsubscribe-auth/ATQUF3EQ2ZD4LYBXM5QVR7DZ3OQZ3AVCNFSM6AAAAABP2E56E2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDIMJQHA4DGOBVG4 . You are receiving this because you were mentioned.Message ID: @.***>

-- Liebe Grüße - Franz

[EnjoyingM]

Can you add your debug log to this github issue then I can have a look

[RaiberF]

Here I have a log file from this morning!

Franz Raiber

Am Fr., 18. Okt. 2024 um 21:41 Uhr schrieb EnjoyingM < @.***>:

Can you add your debug log to this github issue then I can have a look

— Reply to this email directly, view it on GitHub https://github.com/home-assistant/home-assistant.io/issues/35188#issuecomment-2423123296, or unsubscribe https://github.com/notifications/unsubscribe-auth/ATQUF3EAAZXI64WHJFPUDBTZ4FP7ZAVCNFSM6AAAAABP2E56E2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDIMRTGEZDGMRZGY . You are receiving this because you were mentioned.Message ID: @.***>

-- Liebe Grüße - Franz

[EnjoyingM]

Can you upload it using the github web interface?

[github-actions[bot]]

There hasn't been any activity on this issue recently. Due to the high number of incoming GitHub notifications, we have to clean some of the old issues, as many of them have already been resolved. If this issue is still relevant, please let us know by leaving a comment 👍 This issue has now has been marked as stale and will be closed if no further activity occurs. Thank you for your contributions.

[RaiberF]

The problem is still relevant. Please let me know, when your have solution!