home-assistant.io
home-assistant.io copied to clipboard
Energy Dashboard with Enphase Envoy sensor entities
Feedback
I would like to be able to use the Enphase integration for the Energy dashboard. Not all of the Envoy entities are available. The current production and consumption aren't selectable e.g. sensor.envoy_122027029XXX_current_energy_production
URL
https://www.home-assistant.io/docs/energy/solar-panels/
Version
2022.5.1
Additional information
.
Use the lifetime production / consumption entities 😉
Hi
What am I missing here? A dashboard block titled ‘Energy distribution today’ shouldn’t be using lifetime entities – should it?.
When does it provides no match to actual:
Reality:
Cheers
From: Klaas Schoute @.*** Sent: Tuesday, 10 May 2022 12:03 PM To: home-assistant/home-assistant.io @.> Cc: Cliffh33 @.>; Author @.***> Subject: Re: [home-assistant/home-assistant.io] Energy Dashboard with Enphase Envoy sensor entities (Issue #22696)
Use the lifetime production / consumption entities 😉
— Reply to this email directly, view it on GitHub https://github.com/home-assistant/home-assistant.io/issues/22696#issuecomment-1121698233 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AUAB3F7EQ4G27MVZL5J2AC3VJGRR7ANCNFSM5VPWYQDA . You are receiving this because you authored the thread. https://github.com/notifications/beacon/AUAB3F57WHLHZZTYWEG25JTVJGRR7A5CNFSM5VPWYQDKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOILN4DOI.gif Message ID: @.*** @.***> >
Please respond via the GitHub platform and not by mail, it looks like you have attached screenshots but they are not shown.
There is a difference between power or energy entities and the energy dashboard is based on entities that show a kilowatt hour (kWh) values.
When using the lifetime entities the Energy Dashboard seems to 'work out'. The Energy distribution Today however has an incorrect Solar amount going to Home and the Grid feeding the Home when the Home is actually feeding the Grid. Please find a PDF attached with screenshots Energy_screen_shots.pdf .
The way you've set up the entities now doesn't seem correct to me, maybe it's best to take a look at this forum https://community.home-assistant.io/t/enhpase-envoy-on-2021-8-with-new- energy-feature/328668
Or open a new topic / ask your question in the Discord server.
There hasn't been any activity on this issue recently. Due to the high number of incoming GitHub notifications, we have to clean some of the old issues, as many of them have already been resolved. If this issue is still relevant, please let us know by leaving a comment 👍 This issue has now has been marked as stale and will be closed if no further activity occurs. Thank you for your contributions.
Hi guys! I've noticed that the Enphase envoy-s data in Home Assistant only refreshes every minute. Is there a way to refresh them every few seconds, for example every 10 seconds? I understand that the envoy stream sends information every second. On the other hand, the consumption sensor corresponds to the consumption of panels or the electrical network indifferently, but a sensor/entity is missing that calculates the energy input or output of the electrical network to be able to integrate it correctly with the dasboard of energy and that the data square. This data could be obtained from the information on what is produced in the panels and what is consumed in the house, being a positive or negative value depending on whether energy is being imported or exported.
There hasn't been any activity on this issue recently. Due to the high number of incoming GitHub notifications, we have to clean some of the old issues, as many of them have already been resolved. If this issue is still relevant, please let us know by leaving a comment 👍 This issue has now has been marked as stale and will be closed if no further activity occurs. Thank you for your contributions.