Daikin AC integration: Mode Humidification

[mykm203]

The problem

In Daikin AC integration mode HUMIDIFICATION missed, reported as Heat/Cool, which is different (Auto Temperature)

What version of Home Assistant Core has the issue?

2023.2.4

What was the last working version of Home Assistant Core?

No response

What type of installation are you running?

Home Assistant OS

Integration causing the issue

Daikin AC

Link to integration documentation on our website

https://www.home-assistant.io/integrations/daikin/

Diagnostics information

No response

Example YAML snippet

No response

Anything in the logs that might be useful for us?

No response

Additional information

No response

[home-assistant[bot]]

Hey there @fredrike, mind taking a look at this issue as it has been labeled with an integration (daikin) you are listed as a code owner for? Thanks!

Code owner commands

Code owners of daikin can trigger bot actions by commenting:

• @home-assistant close Closes the issue.
• @home-assistant rename Awesome new title Change the title of the issue.
• @home-assistant reopen Reopen the issue.
• @home-assistant unassign daikin Removes the current integration label and assignees on the issue, add the integration domain after the command.

_{^{(message by CodeOwnersMention)}}

---

daikin documentation daikin source _{^{(message by IssueLinks)}}

[issue-triage-workflows[bot]]

There hasn't been any activity on this issue recently. Due to the high number of incoming GitHub notifications, we have to clean some of the old issues, as many of them have already been resolved with the latest updates. Please make sure to update to the latest Home Assistant version and check if that solves the issue. Let us know if that works for you by adding a comment 👍 This issue has now been marked as stale and will be closed if no further activity occurs. Thank you for your contributions.

[mykm203]

Do you need any additional information?

[fredrike]

Do you need any additional information?

Yes please. There is an issue with this in the pydaikin repo and we'll need to add support for hum there first please add more info there.

https://bitbucket.org/mustang51/pydaikin/issues/2/daikin-ururu-sarara-add-support-for

[mykm203]

Good day!

How can I help?

On Sat, 27 May 2023 at 06:43, Fredrik Erlandsson @.***> wrote:

Do you need any additional information?

Yes please. There is an issue with this in the pydaikin repo and we'll need to add support for hum there first please add more info there.

https://bitbucket.org/mustang51/pydaikin/issues/2/daikin-ururu-sarara-add-support-for

— Reply to this email directly, view it on GitHub https://github.com/home-assistant/core/issues/88156#issuecomment-1565191323, or unsubscribe https://github.com/notifications/unsubscribe-auth/A5TPRNF5II3IUWARUJKIPPDXIFZ6ZANCNFSM6AAAAAAU4N2T2I . You are receiving this because you authored the thread.Message ID: @.***>

[fredrike]

I need output from what's sent to the unit and some output on the entrypoint http://<ip>/aircon/get_control_info

[mykm203]

Hi!

How can I start http:///aircon/get_control_info

Is it working in Windows?

On Mon, 29 May 2023 at 08:25, Fredrik Erlandsson @.***> wrote:

I need output from what's sent to the unit and some output on the entrypoint http:///aircon/get_control_info

— Reply to this email directly, view it on GitHub https://github.com/home-assistant/core/issues/88156#issuecomment-1566569669, or unsubscribe https://github.com/notifications/unsubscribe-auth/A5TPRNE2SRU6A6CY3T4HPUTXIQXNLANCNFSM6AAAAAAU4N2T2I . You are receiving this because you authored the thread.Message ID: @.***>

[fredrike]

I guess it works in windows, you should open your browser to the address http://my-daikin-ip/aircon/get_control_info

Change to the right ip-address..

[mykm203]

BRP069B4x

firmware 1.14.84

ret=OK,pow=0,mode=HUM,adv=,stemp=--,shum=40,dt1=25.0,dt2=M,dt3=25.0,dt4=--,dt5=--,dt7=25.0,dh1=AUTO,dh2=50,dh3=0,dh4=40,dh5=40,dh7=AUTO,dhh=50,b_mode=4,b_stemp=--,b_shum=40,alert=255,f_rate=A,f_dir=0,b_f_rate=A,b_f_dir=0,dfr1=5,dfr2=A,dfr3=5,dfr4=A,dfr5=A,dfr6=A,dfr7=5,dfrh=5,dfd1=0,dfd2=0,dfd3=0,dfd4=0,dfd5=0,dfd6=0,dfd7=0,dfdh=0

[mykm203]

Picture from ONECTA

[fredrike]

BRP069B4x

firmware 1.14.84

ret=OK,pow=0,mode=HUM,adv=,stemp=--,shum=40,dt1=25.0,dt2=M,dt3=25.0,dt4=--,dt5=--,dt7=25.0,dh1=AUTO,dh2=50,dh3=0,dh4=40,dh5=40,dh7=AUTO,dhh=50,b_mode=4,b_stemp=--,b_shum=40,alert=255,f_rate=A,f_dir=0,b_f_rate=A,b_f_dir=0,dfr1=5,dfr2=A,dfr3=5,dfr4=A,dfr5=A,dfr6=A,dfr7=5,dfrh=5,dfd1=0,dfd2=0,dfd3=0,dfd4=0,dfd5=0,dfd6=0,dfd7=0,dfdh=0

Can you paste a few different outputs with different modes so we can figure out what to look for to identify that your device support mode=HUM (I would guess that b_shum is the key but we need more outputs).

Also, please paste a few different humidification targets.

@icovada do you like to have a look in implementing this in pydaikin?

[icovada]

ohhh a humidifier, interesting!

[mykm203]

STANDBY ret=OK,pow=0,mode=3,adv=,stemp=27.0,shum=0,dt1=25.0,dt2=M,dt3=27.0,dt4=25.0,dt5=25.0,dt7=25.0,dh1=AUTO,dh2=50,dh3=0,dh4=0,dh5=0,dh7=AUTO,dhh=50,b_mode=3,b_stemp=27.0,b_shum=0,alert=255,f_rate=A,f_dir=0,b_f_rate=A,b_f_dir=0,dfr1=5,dfr2=5,dfr3=A,dfr4=5,dfr5=5,dfr6=A,dfr7=5,dfrh=5,dfd1=0,dfd2=0,dfd3=0,dfd4=0,dfd5=0,dfd6=0,dfd7=0,dfdh=0

HUMIDIFY - LOW ret=OK,pow=1,mode=HUM,adv=,stemp=--,shum=40,dt1=25.0,dt2=M,dt3=27.0,dt4=--,dt5=--,dt7=25.0,dh1=AUTO,dh2=50,dh3=0,dh4=40,dh5=40,dh7=AUTO,dhh=50,b_mode=4,b_stemp=--,b_shum=40,alert=255,f_rate=A,f_dir=0,b_f_rate=A,b_f_dir=0,dfr1=5,dfr2=5,dfr3=A,dfr4=A,dfr5=A,dfr6=A,dfr7=5,dfrh=5,dfd1=0,dfd2=0,dfd3=0,dfd4=0,dfd5=0,dfd6=0,dfd7=0,dfdh=0

HUMIDIFY - STD (Standard) ret=OK,pow=1,mode=HUM,adv=,stemp=--,shum=45,dt1=25.0,dt2=M,dt3=27.0,dt4=--,dt5=--,dt7=25.0,dh1=AUTO,dh2=50,dh3=0,dh4=45,dh5=45,dh7=AUTO,dhh=50,b_mode=4,b_stemp=--,b_shum=45,alert=255,f_rate=A,f_dir=0,b_f_rate=A,b_f_dir=0,dfr1=5,dfr2=5,dfr3=A,dfr4=A,dfr5=A,dfr6=A,dfr7=5,dfrh=5,dfd1=0,dfd2=0,dfd3=0,dfd4=0,dfd5=0,dfd6=0,dfd7=0,dfdh=0

HUMIDIFY - HI ret=OK,pow=1,mode=HUM,adv=,stemp=--,shum=50,dt1=25.0,dt2=M,dt3=27.0,dt4=--,dt5=--,dt7=25.0,dh1=AUTO,dh2=50,dh3=0,dh4=50,dh5=50,dh7=AUTO,dhh=50,b_mode=4,b_stemp=--,b_shum=50,alert=255,f_rate=A,f_dir=0,b_f_rate=A,b_f_dir=0,dfr1=5,dfr2=5,dfr3=A,dfr4=A,dfr5=A,dfr6=A,dfr7=5,dfrh=5,dfd1=0,dfd2=0,dfd3=0,dfd4=0,dfd5=0,dfd6=0,dfd7=0,dfdh=0

HUMIDIFY - CONT ret=OK,pow=1,mode=HUM,adv=,stemp=--,shum=CONTINUE,dt1=25.0,dt2=M,dt3=27.0,dt4=--,dt5=--,dt7=25.0,dh1=AUTO,dh2=50,dh3=0,dh4=CONTINUE,dh5=CONTINUE,dh7=AUTO,dhh=50,b_mode=4,b_stemp=--,b_shum=CONTINUE,alert=255,f_rate=A,f_dir=0,b_f_rate=A,b_f_dir=0,dfr1=5,dfr2=5,dfr3=A,dfr4=A,dfr5=A,dfr6=A,dfr7=5,dfrh=5,dfd1=0,dfd2=0,dfd3=0,dfd4=0,dfd5=0,dfd6=0,dfd7=0,dfdh=0

STANDBY ret=OK,pow=0,mode=HUM,adv=,stemp=--,shum=40,dt1=25.0,dt2=M,dt3=27.0,dt4=--,dt5=--,dt7=25.0,dh1=AUTO,dh2=50,dh3=0,dh4=40,dh5=40,dh7=AUTO,dhh=50,b_mode=4,b_stemp=--,b_shum=40,alert=255,f_rate=A,f_dir=0,b_f_rate=A,b_f_dir=0,dfr1=5,dfr2=5,dfr3=A,dfr4=A,dfr5=A,dfr6=A,dfr7=5,dfrh=5,dfd1=0,dfd2=0,dfd3=0,dfd4=0,dfd5=0,dfd6=0,dfd7=0,dfdh=0

[issue-triage-workflows[bot]]

There hasn't been any activity on this issue recently. Due to the high number of incoming GitHub notifications, we have to clean some of the old issues, as many of them have already been resolved with the latest updates. Please make sure to update to the latest Home Assistant version and check if that solves the issue. Let us know if that works for you by adding a comment 👍 This issue has now been marked as stale and will be closed if no further activity occurs. Thank you for your contributions.

[mykm203]

Do you need any additional info?

[bubonicbob]

@mykm203 Can you also post the result of http://youraddress/aircon/get_model_info

[mykm203]

ret=OK,model=NOTSUPPORT,type=N,pv=1,cpv=0,mid=NA,s_fdir=3,en_scdltmr=1,en_onofftmr=1

[issue-triage-workflows[bot]]

There hasn't been any activity on this issue recently. Due to the high number of incoming GitHub notifications, we have to clean some of the old issues, as many of them have already been resolved with the latest updates. Please make sure to update to the latest Home Assistant version and check if that solves the issue. Let us know if that works for you by adding a comment 👍 This issue has now been marked as stale and will be closed if no further activity occurs. Thank you for your contributions.

[mykm203]

Can I help you more?

[Nestlle]

Hi! Any news on this? I would really love to see more integration with this daikin model. it has LOTS of functionalities....which are not available on the integration...

[sbel28]

Hi,

“Daikin AC” integration is gradually becoming obsolete, at least for the new “C” type Wifi interfaces. No more way to communicate locally. You must now go through the “Daikin Onecta” integration for these machines, which is done via a Daikin API. It also works with older models (i have so). The future of Daikin is Onecta. They are working hard on this interface. Requests like http://youraddress/aircon/get_model_info no longer give anything. Why persist. I automate my air conditioning according to the weather which also comes from the Internet. I don't have a standalone weather station and I don't want one. So, internet, not internet, what is the problem?

Try this new integration (onecta). It gives new information including for B models. Note that even Onecta Android does not display the humidity level for model B (but ok for C). However, dehumidification works well on both models. But no adjustment just on/off. No settings !

Yours truly.

[issue-triage-workflows[bot]]

There hasn't been any activity on this issue recently. Due to the high number of incoming GitHub notifications, we have to clean some of the old issues, as many of them have already been resolved with the latest updates. Please make sure to update to the latest Home Assistant version and check if that solves the issue. Let us know if that works for you by adding a comment 👍 This issue has now been marked as stale and will be closed if no further activity occurs. Thank you for your contributions.

[KareruCZ]

Hi Everyone, the humidification function still does not show and instead it displays as Heat/Cool. Can someone please look at that? I appreciate this integration! Thank you!

[zen2]

@KareruCZ

Hi Everyone, the humidification function still does not show and instead it displays as Heat/Cool. Can someone please look at that? I appreciate this integration! Thank you!

"Heat/Cool" mode is not the humidification function that is missing but the AUTO mode that heat or cool to reach the setpoint temperature.

[issue-triage-workflows[bot]]

There hasn't been any activity on this issue recently. Due to the high number of incoming GitHub notifications, we have to clean some of the old issues, as many of them have already been resolved with the latest updates. Please make sure to update to the latest Home Assistant version and check if that solves the issue. Let us know if that works for you by adding a comment 👍 This issue has now been marked as stale and will be closed if no further activity occurs. Thank you for your contributions.

[zen2]

still an actual issue.

[issue-triage-workflows[bot]]

There hasn't been any activity on this issue recently. Due to the high number of incoming GitHub notifications, we have to clean some of the old issues, as many of them have already been resolved with the latest updates. Please make sure to update to the latest Home Assistant version and check if that solves the issue. Let us know if that works for you by adding a comment 👍 This issue has now been marked as stale and will be closed if no further activity occurs. Thank you for your contributions.