How much Instances (strings) are calculated

[proasnet]

The problem

Hello, I have configured three strings, and calculated to Energy panel is only first two, the third is not. I have free use, is this limited for two strings? Thank you

JV String and JZ String is two working string that are calculated JV String 2 is not calculated Dark yellow is from the first inverter = the first and the second strings Light yellow is from the second inverter = third string

What version of Home Assistant Core has the issue?

2022.8.5

What was the last working version of Home Assistant Core?

No response

What type of installation are you running?

Home Assistant OS

Integration causing the issue

Forecast Solar

Link to integration documentation on our website

https://www.home-assistant.io/integrations/forecast_solar/

Diagnostics information

config_entry-forecast_solar-2f576ae765919f708ea0d85ed3f31756.json.txt

Example YAML snippet

No response

Anything in the logs that might be useful for us?

No response

Additional information

No response

[probot-home-assistant[bot]]

forecast_solar documentation forecast_solar source _{^{(message by IssueLinks)}}

[probot-home-assistant[bot]]

Hey there @klaasnicolaas, @frenck, mind taking a look at this issue as it has been labeled with an integration (forecast_solar) you are listed as a code owner for? Thanks! _{^{(message by CodeOwnersMention)}}

[klaasnicolaas]

To my knowledge there is no limit on the number of zones you add, except that you will go faster through your rate limit of 12 per hour (but that is unrelated to this issue). How did you set this up in the energy dashboard?

[flopp999]

I also have a strange issue: I am having 3 zones I have check that all settings are correct

[proasnet]

The problem is still not solved. 3 zones are set, but it only recalculates 2 zones.

[klaasnicolaas]

Issue reopened.

But I don't know where it goes wrong. Assuming that all your 3 zones get their entity data properly, it could very well be a frontend issue 🤷🏻‍♂️

[proasnet]

Yes, I have entity data from all 3 zones, but in energy panel is not displayed all 3, but only the first two.

[MrOzzOnline]

Yes, I have entity data from all 3 zones, but in energy panel is not displayed all 3, but only the first two.

You should be able to choose the zone options editing the solar production entity options in the solar production section of the energy dashboard settings. It might be a frontend issue when using two inverters, but I can't test that. A resolution might be to select all zones on the first production entity options.

[proasnet]

Thank you. Now it look, that is working.