David Banks
David Banks
``` ;; Step 3: Check if slot is RAM .testram lda &8006 eor #&FF sta &8006 cmp &8006 ``` We really need to write two locations with two different values....
Suggestion from Col here: http://www.stardot.org.uk/forums/viewtopic.php?p=200617#p200617 "also, when using the program, may be could add a question from DFS>MMC program for 40 or 80 Track, or just press Escape at T41...
Would only be space for this in the non-SRAM version for the Model B (and Electron?)
Suggestion from Steve Picton: > I was tinkering with MMFST on the '2MHz Econet' in the Master and was surprised that it wasn't much quicker than the standard User Port....
From Mincr on stardot: One quick bug: I don't seem to be able to *DIN drives 2 and 3, although 0 and 1 work fine. If I do *DIN 3...
Hi Ian, I have a couple of V2 analog boards that I would like to bring back into use. I'm currently testing with an RGBtoHDMI issue 2, the BBC CPLD...
(This thread started in PMs on stardot with some questions from Ian) > How do you make the vasm assembler? I tried running make but just got an error. (I'm...
This may not be a bug, but there is room for improvement. This calibration came from Lurkio: https://stardot.org.uk/forums/viewtopic.php?p=340203#p340203 I've attached the whole file: [Log.txt](https://github.com/hoglet67/RGBtoHDMI/files/7488375/Log.txt) It's the final calibration run in...
I thought I would create a issue to record my experiences with the V2 Analog Frontend, so I can find it again in the future. I built up the V2...
To force the CPU to start executing at a given location. There are a couple of approaches to consider: 1. Extend the CPU core to support register writing on the...