New RaspberryPi Revisions need newer Firmware

[explit28]

Hello @hoglet67 I tried to use your RGBtoHDMI with a newer Revision of RaspberryPi 3A+ and found out, that, the newer Firmware (which was needed to boot this RPI) was not included with you latest release. I googled around and found exact the same Problem with batocera Release: https://retropie.org.uk/forum/topic/34840/brand-new-raspberry-pi3a-wont-boot-with-any-version-of-retropie-ive-tried-solved

The solution was very simple:

• Download latest Raspberry Pi Firmware Files: https://github.com/raspberrypi/firmware/tree/stable/boot

~~- Copy all start.elf* and fixup.dat* files to the SD-Card.~~

• Copy the newer files fixup4cd.dat fixup_cd.dat start4cd.elf start_cd.elf

to the root of the SD-Card.

Now it will work with newest RPI 3A+. Please include this newer files with the you next release.

RPI_NewFW.zip

Thanks

[IanSB]

@explit7

Can you give the latest Alpha 65G release on my fork a test: https://github.com/IanSB/RGBtoHDMI/issues/29

I updated the firmware a few weeks ago. Also can you check the HDMI audio output test works on your monitor(s).

[explit28]

Hello @IanSB, I tested your fork. Also on your fork, new firmware files are missing. Your fork works after i copied new Raspberry Pi Firmware onto SD-Card. I couldnt test HDMI Audio, because on my Micro8088 IBM PC/XT i have an old Nokia VGA Monitor connected.

Here are the Firmware files which are needed for the new Raspberry Pi 3A+ (and maybe other newer Revisions) new_firmware.zip

[IanSB]

@explit7 Are you sure you tested the right version? (Alpha 65G posted mid-way through that issues page, not the file at the top which I have now removed) I just downloaded the Raspberry Pi Firmware Files from the above link again and they match the ones I downloaded on the 23rd April and they are different and more recent than the ones in your zip which are datestamped in March.

[explit28]

I tested Alpha65G from here: https://github.com/IanSB/RGBtoHDMI/files/15243056/Alpha65G.zip ~~The new Firmware files are also missing.~~

~~Please check, the new Firmware files from this archive https://github.com/hoglet67/RGBtoHDMI/files/15257014/new_firmware.zip need to be on the root of the SD-Card, otherwise the new Revision RaspberryPi 3A+ will not boot at all.~~ I know, this is very strange, but i checked to Raspberry Pi 3A+. One old Revision - works like a charm out of the box, and the new Revision (which look the same) but doesn't boot at all, if the new firmware files are not on the card.

[IanSB]

@explit7

Only one pair of firmware files should be needed so I'm trying to work out what is going on here.

There are 4 pairs of firmware: start.elf + fixup.dat - the standard firmware start_x.elf + fixup_x.dat - the extended firmware start_cd.elf + fixup_cd.dat - the cut down firmware start_db.elf + fixup_db.dat - the debug firmware These are for the Pi zero, 1,2 & 3 The versions with 4 in the filename are for the Pi4 etc.

This project loads the cut down ( _cd ) version in the config.txt which is why only that pair are on the sd card These files are more recent than yours so I don't understand what is going on unless one set of firmware is loading another in some circumstances

On your working SD card can you remove all the files except the two _cd versions and reboot If that stops working, add the following pairs back in order and reboot after each pair until it works again: start.elf + fixup.dat start_x.elf + fixup_x.dat start_db.elf + fixup_db.dat all the 4 versions

[explit28]

@IanSB You are right. My mistake. Somehow, i messed something up with different SD-Cards.

Your Alpha65G Build works OOB on my newer RPI3A+. This is enough, that this files from your alpha65G Firmware are placed on the sd-card fixup4cd.dat fixup_cd.dat start4cd.elf start_cd.elf

I created an archive with this 4 files (in your newer versions) RPI_NewFW.zip

I will change the thread a little bit, to not confuse other users.