hle5128
hle5128
Hi, Thank you for your reply, just bought you a cup of coffe. omr-iperf3 doesn't work in beta6 so I'm using ping. To answer your questions: 1) On Tmobile, but...
> I see eth1 and eth2, you are using some USB adapters? It's often not a good idea on RPI. > What is the result of Network->MPTCP "MPTCP support check"...
> I've had improvements with 2 symmetrical WANs by adding additional latency in one of the WAN interfaces section, which used around 20ms. can you elaborate? so you are adding...
> @hle5128 I see a 308ms latency on wan2 from the status page, latency is stable or not? the WAN2 is connected to a different tower at a different angle...
> @hle5128 I see a 308ms latency on wan2 from status page, latency is stable or not ? @Ysurac here is the 30s ping on WAN2: ``` --- 198.98.62.146 ping...
@Network-Traditions seem like a similar experience to what i found, I do have a 500Mbps cable to test, and when testing a single Cable alone, speed and latency are near...
@Ysurac the vps is double speed average of wan1+wan2 ``` Download Results: gid |stat|avg speed |path/URI ======+====+===========+======================================================= cd568f|OK | 39MiB/s|/tmp/testdeleteme/1Gb.dat ``` and I switched to Intel N4020 x86_64 ``` wan1:...
I gave up on this, you wont get speed combined at all regardless, (I tried x86 as well) my wan stand alone is faster when combined 2 wan, and the...
I already donated a few weeks ago to Yannick. What is performance like comparing to ras pi 4? > On Jul 7, 2022, at 11:36 AM, suyuan ***@***.***> wrote: >...
> > 几周前我已经向 Yannick 捐款了。与 ras pi 4 相比，性能如何？ > > […](#) > > On Jul 7, 2022, at 11:36 AM, suyuan _**@**_.***> wrote: What is the request ?...