Smart detections not working with latest version of Protect (4.1.53)

[pbush25]

Homebridge UniFi Protect Version

7.1.2

Homebridge Platform and OS

Raspi 4

Homebridge Version

1.8.4

Node Version

18.17.1

UniFi OS Version

4.0.6

UniFi Protect Controller Version

4.1.53

Describe the problem

Prior to updating to Protect 4.1.X, all smart detections from Protect were correctly delivered to HBUP to drive notifications from the cameras, with snapshots, when a person/animal/vehicle was detected. 4.1.X went to GA today, 8/29.

After updating to 4.1.X (since Sunday, 8/25), there has been exactly one smart detection delivered to HBUP. The cameras and their associated contact sensors are still all in Home, and I can still stream the contents of the cameras, so HBUP is communicating with Protect, but the API is presumably not delivering the content correctly for some reason.

I did try updating my HBUP plugin from 6.8.* to the latest, which did not alleviate the issue.

Homebridge HBUP JSON configuration

{
            "controllers": [
                {
                    "address": "192.168.XX.XXX",
                    "doorbellMessages": [
                        {
                            "message": "Coming to the door"
                        }
                    ],
                    "name": "XXXX UNVR",
                    "password": "password",
                    "username": "localadmin"
                }
            ],
            "name": "UniFi Protect",
            "options": [
                "Enable.Motion.SmartDetect",
                "Enable.Motion.SmartDetect.ObjectSensors",
                "Disable.Video.HKSV.D021F9923C27",
                "Disable.Video.HKSV.70A7410C2699",
                "Disable.Video.HKSV.68D79ACF3BD3",
                "Disable.Video.HKSV.68D79AE15DD8",
                "Disable.Video.HKSV.F4E2C67AE608",
                "Disable.Video.HKSV.E063DA00FFD3",
                "Disable.Video.HKSV.F4E2C67AE59E",
                "Enable.Video.Transcode.Hardware.F4E2C67AE608",
                "Enable.Video.Transcode.F4E2C67AE608",
                "Enable.Video.Transcode.Hardware.70A7410C2699",
                "Enable.Video.Transcode.Hardware.68D79ACF3BD3",
                "Enable.Video.Transcode.Hardware.68D79AE15DD8",
                "Enable.Video.Transcode.Hardware.E063DA00FFD3",
                "Enable.Video.Transcode.70A7410C2699",
                "Enable.Video.Transcode.68D79ACF3BD3",
                "Enable.Video.Transcode.D021F9923C27",
                "Enable.Video.Transcode.68D79AE15DD8",
                "Enable.Video.Transcode.E063DA00FFD3",
                "Enable.Log.Motion.70A7410C2699",
                "Enable.Motion.SmartDetect.68D79A3E3F13",
                "Enable.Motion.SmartDetect.ObjectSensors.68D79A3E3F13",
                "Enable.Video.Stream.UseApi.68D79A3E3F13",
                "Enable.Video.Transcode.Hardware.68D79A3E3F13",
                "Disable.Video.Transcode.HighLatency.68D79A3E3F13",
                "Disable.Video.Transcode.68D79A3E3F13",
                "Disable.Video.HKSV.TimeshiftBuffer.68D79A3E3F13"
            ],
            "videoEncoder": "h264_omx",
            "platform": "UniFi Protect"
        },

Relevant log output

n/a - no logs capturing motion exist since they're not coming from the API.

Acknowledgment that you are only running UniFi OS and UniFi Protect releases from the Ubiquiti Official release channel

• [X] I acknowledge that I am not running any early access / beta firmwares or operating systems from either Ubiquiti or Apple.