hipersayanX

You must create the akvcam.conf file in /etc/modules-load.d, check [here](https://github.com/webcamoid/akvcam/wiki/Usage-and-examples#load-on-boot).

I've updated the wiki, you must use ``` echo akvcam | sudo tee /etc/modules-load.d/akvcam.conf ``` >To complete the friendly output module install experience, the load-after--boot should have been implicit. Isn't...

Give me the output of the following commands: ``` uname -a cat /etc/lsb-release cat /etc/os-release ``` Also try loading the driver as: ``` sudo modprobe akvcam loglevel=7 ``` Then give...

``` andre@Loke:~$ sudo modprobe akvcam loglevel=7 [sudo] password for andre: modprobe: FATAL: Module akvcam not found in directory /lib/modules/5.15.0-47-generic ``` You have not installed the driver. ```sudo rm -rf /opt/akvcam```...

>andre@Loke:~/Downloads/akvcam-master/src$ sudo modprobe akvcam loglevel=7 The driver is already installed, here > - Installing to /lib/modules/5.15.0-47-generic/updates/dkms/ That's why is showing ``` andre@Loke:~/Downloads/akvcam-master/src$ ls /lib/modules/$(uname -r)/extra/akvcam.ko* ls: cannot access '/lib/modules/5.15.0-47-generic/extra/akvcam.ko*': No...

```dmesg | tail -200``` gives you any output?

Sorry to be late, I was working and did not checked the notifications before. Don't run the virtual camera, you must just reload the driver and soon after run ```dmesg...

>@hipersayanX - no problem! , I can't remember to have paid for a service level agreement for your support. :) I would have to charge x100 for the service :laughing:...

>I think you can safely mark it a bug... Are you sure?  >then I rebooted, and then executed as user: >akvcam-linux-1.2.2.run (during the installation - I got asked for...

The problem is that you are bypassing every single step of installation and uninstallation :sweat: Webcamoid is still detecting the driver because, even if you have removed /opt/akvcam, [the driver...