Support UX330 - Skylake

[Fradri]

What is your laptop?

Asus UX330UA

Full specs

• Intel Core i5 6200U (Skylake)
• Chipset Intel HD Graphics 520
• Ram 1x8 Go LPDDR3
• SSD 256 Go SATA3 M.2
• Display 13.3’’ Full HD IPS

Connectors :

• HDMI : x1 (Micro HDMI)
• USB : x3 (1 x USB 3.1 Type C / 2 x USB 3.0)
• Card reader : x1 (SD / SDHC / SDXC)
• Audio : x1 (Jack 3,5mm combo headphone / mic)

ACPI files from Clover

origin.zip

AIDA64 reports

report-AIDA64.txt

[Fradri]

After several tests installation seems to fail … (Using UX330 Kabylake build) I just replaced my network card with Dw1560 (Bcm94352z) to see if that solves the problem ...

[Fradri]

So, i have finish to install OSX Catalina with success !

• I have used all kext of the folder le_kexts + SSDT-ELAN.aml and SSDT-I2CBUS.aml

• I build my own config.plist because the build for UX330 Kabylake dosn't work. (Based on config.plist by RehabMan for Intel HD 520)

• I patch my EC to create an SSDT-EC.aml in CLOVER\ACPI\patched. (I used SSDTTime to do this)

What's work / don't work ?

• [✔️ ] Wifi / Bluetooth
• [✔️ ] Camera / Micro
• [✔️ ] All USB
• [✔️ ] Trackpad
• [ ✔️] Sound [SOLVED by using layout-3 ]
• [ ✔️] Can't adjust brightness [SOLVED by using PNLF.aml ]
• [ ✔️] Small interface / scaling [SOLVED by using HiDPI]
• [ ❌] No Fn Keys
• [ ❌] Keyboard backlight work but no control (always on)
• [ ❌] No sleep on lid close (keyboard backlight still enable)

I have to patch my SSDT but i don't have the knowledge to do that for now … Also AsusSMC seem to not work with my configuration ...

If someone can help me, any help will be appreciated 😊

[Fradri]

I provide my config.plist, and ACPI\patched folder if that can help 😉 patched.zip config.plist.zip

[gxaris]

Hello, I am attaching my EFI (Clover) folder for my UX350CA laptop. In my setup, EVERYTHING is working and my system is stable. I have replaced the WiFi card with a cheap dw1820a. I know its not the same model but maybe it will help somehow :) CLOVER.zip