imagebuilder
imagebuilder copied to clipboard
hexdump0815
misc: ubuntu jammy image requests
i'll build debian bookworm images by default first now to limit the creation and testing effort a bit - this issue is here in case anyone is interested in an ubuntu jammy image as well for a certain system - in this case just add a comment for which system it would be required and i'll try to create and upload one during the following days ...
@llcool - for which image? i can only build them one by one on request and there are quite a few supported systems meanwhile :)
@llcool - i have uploaded a jammy image now to https://github.com/hexdump0815/imagebuilder/releases/tag/230218-03 ... i did not have time yet to test it myself, but plase give it a try and let me know if it works for you
@gentoolinux - i finally got to it - now there is also an ubuntu jammy image for kukui at https://github.com/hexdump0815/imagebuilder/releases/tag/230218-01
@gentoolinux - i finally got to it - now there is also an ubuntu jammy image for kukui at https://github.com/hexdump0815/imagebuilder/releases/tag/230218-01
Thank you very much! I will try it this weekend. By the way, the Debian bookworm image is working pretty good. The only issue I experienced so far is that the kernel crashes if I connect a USB-C dock. The dock (HDMI and Ethernet) is working fine with ChromeOS.
i think its most probably the hdmi port on the dock which makes trouble - hdmi over usb-c does not work properly yet on kukui
hexudump0815,
when kappa connects to usb-c display or hdmi, it detects the display but does not output anything. Any fixes?
Thanks, Aneesh
@aneeshlingala - this is a known problem and i'm not aware of a working solution to fix this yet
update: it might be worth to check how chromeos is handling it - i think they use some kind of hack which is not really upstreamable and thus not in mainline - one thing is important to keep in mind: mt8183 can only support external displays up to something like 1366x768 due to hardware limitations
@hexdump0815 - I have tested the jammy build on kukui. Almost everything works (Wifi, Bluetooth, Audio, Webcam, Touchscreen) :-) Only the USB-C port causes trouble. When I connect my dock it seems like all USB ports are disconnected. After connecting the dock I receive Input/Output errors for device sda (system was booted from USB drive). If the system is booted with the USB dock connected the last messages I see are
hub 1-1:1.0: hub_ext_port_status failed (err = -71)
usb 1-1: Failed to suspend device, error -71
Do you have any tips how to further trace down the issue?
@gentoolinux - i have seen similar problems when running with usb root - it looks like usb is not really clean yet in the code - running from emmc for me is perfectly fine and i guess the usb case is not being tested too well by the mediatek maintainers as its not a real usecase for chromeos, which always only runs from emmc
update: just to add some simlar observations from my side - i have a kukui with broken emmc which i somehow got working to run from usb and as kukui only has one usb-c port i have a usb-c powerable hub on it - if i run from usb root in this case i always get root fs errors as soon as i connect or disconnect power which sometimes even results in the fs to get corrupted beyond repair - what i found out works in this case is to put the kukui into suspend, then connect or disconnect power and then wake it up again - this way i got it working kind of reliable with this setup :)
Could you compile an ubuntu jammy image for the kukui baseboard? the older image actually mounted the root drive as read only. Thanks in advance!
Could you attempt to compile a jammy image for the aarch64 7c based systems (galaxy book go in my case)?
@Mo-Xcoder - noted, but it might take a few days until i get to it and please keep in mind that quite a lot of things are not working on the galaxy book go ...
@Mo-Xcoder - noted, but it might take a few days until i get to it and please keep in mind that quite a lot of things are not working on the galaxy book go ...
Take your time, and thank you so much for these images
Hello would like to request compatibility for the Duet 5 (Homestar) Trogdor build.
@raremotas - you mean a jammy image for trogdor? if yes, then its noted now - it will also take a few days until i get to it ...
@sea768 - kukui jammy image is ready now at https://github.com/hexdump0815/imagebuilder/releases/tag/230917-01 - please let me know if it works for you - i only did a quick boot and login test so far with it ...
@Mo-Xcoder - snapdragon 7c woa jammy image is ready now at https://github.com/hexdump0815/imagebuilder/releases/tag/230308-01 - please let me know if it works for you - i only did a quick boot and login test so far with it ...
@raremotas - you mean a jammy image for trogdor? if yes, then its noted now - it will also take a few days until i get to it ...
Yes I meant the trogdor image.
Thank you hexdump, no rush and much appreciated.
@2xrick - ok noted down - might take a few days ... @raremotas - sorry, i forgot about the trogdor one - it will hopefully come soon too ...
@raremotas - it took a while, but the trogdor jammy image is now at https://github.com/hexdump0815/imagebuilder/releases/tag/230922-01 and @2xrick - the peach jammy image is now at https://github.com/hexdump0815/imagebuilder/releases/tag/230924-02 ... i did not find the time yet to test them, so please let me know if they work for you
Awesome project!! A Ubuntu Jammy image for Chromebook Oak (Acer Chromebook R13) please?
