Hermann Kraus
Hermann Kraus
Hello Roger, I just added some images of the display (folder: images). The schematic by Zimmermann is mostly correct. It is part of this repository (directory: hardware). I added a...
Do you power the device with a 12V supply. I just tried connecting the ST-Link only and got exactly the same behavior you saw. Beeping, but no display.
As far as I understand the Chinese datasheets the TM1650 and the ET6226 should be fully compatible. It would help me debug the issue if you could attach the logic...
It will create telegrams because turning the encoder changes the text on the display. There is a continuous stream of data to the top display (because it blinks) but the...
While I2C does not depend on precise timing I have identified a potential problem: The current code outputs the I2C signal as fast as it can. This is fine with...
Sorry, I was busy the last few days. I hope to get the software ready soon.
Hello! Sorry, I completly forgot about this problem. I made the new software now. # Version 1 (branch: ET6226_1) This version does the following things in a continous loop: *...
Sorry, I'm currently busy with other stuff but this issue is on my TODO list.
I'm pretty sure this isn't related to the TextSymbolizer changes. One of the earlier crashlogs shows this message "### WARNING: Using 'name' in TextSymbolizer is deprecated (http://trac.mapnik.org/wiki/TextSymbolizer)" This is the...
Currently I don't have enough spare time to work on a major revision of this project. You can upload some photos of the boards here and I will compare them...