herbi3

I am interested in also changing the options on the inverter also (i.e when the feed in tariff for solar goes negative (getting charged for exporting) I would like to...

there is the repo https://github.com/binsentsu/home-assistant-solaredge-modbus where it is able to change the settings on the inverter by writing the changes to the inverter, but it is for homeassistant - is...

thanks @nmakel, I got the active power limit to work, however i am trying to change the export control mode, limit and site limit (I have x2 inverters, trying to...

thank you @nmakel I really appreciate this and all the work you've put into this! I tried the changing of settings and commit, however it I get this error from...

Interesting - I didn't have to enable the advanced power control or change the RRCR mode (Although it is explicitly stated in the Solaredge documentation) I wrote the changes for...

>Interesting - I didn't have to enable the advanced power control or change the RRCR mode (Although it is explicitly stated in the Solaredge documentation) >I wrote the changes for...

> thanks for you helping, i tryed but it is not working. > > I did not test the same meter at the SE10k its a different SE-MTR-3Y-400V-A vs. SE-WND-300-4Y-MB....

I wouldn't recommend to adjust the power setting, but to instead adjust the export limit via modbus instead. Adjusting the export control limit option is more accurate in terms of...

> Agree with herbi3 that it's better to let the inverter do this work but then the inverter should have some metering. Is there an example available about how to...

I have tested, and you can still read the data for the inverters, meters and batteries with the EV charger, however I have not yet been successful in reading the...