Tom Herbers

@sjtuross Yeah, I haven't checked if something has changed, but that's how I remember it. Feel free to take whatever you need from my #2413 so that you can implement...

I ran into the same problem (interstingly with quite a similar setup (Pi3b+, ConBeeIII, Aqara E1 Radiator)). Looks a lot like #11647. Even if that's for the ConBee II. I...

Just for completeness: I've had, in addition to the receive (send from zigbee adapter but never received by the Thermostat) errors, the problem that the Xiaomi Aqara E1 Radiator did...

The main reason to have this as a dedicated feature is in my eyes that it then wouldn't require some sort of wrapper or treating `secret "...";` as your secret...

A quick test seems promising (see updated initial post). I'm not too keen to brick (and attempt to restore the device). What tests do we want to do before readding...

~it appears as if those devices haven't been marked as outdoor devices. I will have to look into that.~ ah, okay #3070 / https://github.com/freifunk-gluon/gluon/commit/d6dd6293ba9c090da43b403b2c58613c8128fb5c

I've tried it and the device didn't came back up. Don't know what's gone wrong. A Power Cycle didn't change anything. Will have to look into how recovery could work.

The current state seems to work regarding resolvig the read only problem. Hoewer, in my tests with an Ubiquiti NanoBeam AC Gen1 (XC) i've had the problem that the device...

I've rebased this onto #3184

I could validate the fix on the NanoBeam 5AC 19 (XC). Hoewer that device is currently in Darmstadt and it's currently raining which doesn't help with my motivation to do...