Burn Optical Disc: :-( unable to WRITE@LBA=...: Input/output error

[probonopd]

At the end of the writing process we sometimes get:

:-( unable to WRITE@LBA=...: Input/output error

Would a full blanking of the disc solve this? If yes, we need to add this feature to Burn Optical Disc.app.

[probonopd]

Also stops in the middle of blanking the disc when using dvd+rw-format on the command line:

FreeBSD% dvd+rw-format -force=full -blank=full /dev/cd0 
* BD/DVD±RW/-RAM format utility by <[email protected]>, version 7.1.
* 4.7GB DVD-RW media in Sequential mode detected.
* blanking 9.4%:-( unable to TEST UNIT READY: Input/output error

Defective disc and/or writer?

[probonopd]

Same disc, totally different writer:

Users-RevoOne-RL85% sudo dvd+rw-format -force=full -blank=full /dev/cd0 
* BD/DVD±RW/-RAM format utility by <[email protected]>, version 7.1.
* 4.7GB DVD-RW media in Sequential mode detected.
* blanking 0.0-:-( unable to PERFORM OPC: Input/output error
-:-( unable to BLANK: Input/output error