ISO icon indicating copy to clipboard operation
ISO copied to clipboard
verified publisher icon helloSystem

Booting stops when RF switch is off

Open OspreyJr opened this issue 3 years ago • 5 comments

On installed helloSystem 0.8.0 experimental booting stops when RF switch is set to off on Lenovo T520. It can reacts to Ctrl-Alt-Del and shuts down and reboots.

Booting stops at the position where RF switch state is being read.

OspreyJr avatar Aug 26 '22 18:08 OspreyJr

What happens when you boot with the RF switch set to on until you can see the desktop. Then set the RF switch to off.

Does the device reboot? Immediate reboot or black/grey screen first?

probonopd avatar Aug 29 '22 17:08 probonopd

When booting with the RF switch set to on until you can see the desktop, then setting the RF switch to off is followed by the kernel message "radio disabled". The system then continues to work properly.

OspreyJr avatar Sep 04 '22 21:09 OspreyJr

Do you see the same behavior with GhostBSD?

probonopd avatar Sep 10 '22 09:09 probonopd

GhostBSD was booting ok.

OspreyJr avatar Sep 10 '22 11:09 OspreyJr

That is very interesting. I wonder what causes the difference between the two systems.

probonopd avatar Sep 11 '22 19:09 probonopd