helioshk

Suggestion: Integrate/average waterfall if WF-rate is slower than "fast"

2

As far as I understand, if the WF-rate is for example 1 Hz, kiwid will take a spectrum snapshot each second and then add it to the waterfall. It would...

Frequency range not locked to source limitations

2

When connecting to a spyserver, the signal frequencies are 6250 Hz too low, in the FFT as well as the audio, compared to other spyserver client (sdr#) and calibrated reference....

Old frequency should not be used anymore and is mostly abandoned. Reference/Discussion: https://wsprnet.org/drupal/node/7834

Hi, The frequency for the 80m band has changed quite a while ago and >90% of the operators have migrated to the new frequency. https://wsprnet.org/drupal/node/7834 It would be good if...

In the timeline layers there is the option to include callisto radiograms. However the spectrogram seems to be basically empty. Is there a documentation how to configure those? E.g. which...

Timeline doesn't update

6

Hi After adding a timeline (for example XRS-B), the timeline seems to never get updated anymore. For example if i leave jhelioviewer running for 2 hours, no newer data is...

Hi, It seems that spots with single digit dBm value are not recognized by digiskimmer and thus not uploaded. For example I get: `2023-08-17 09:10:37,028 INFO 209383 [QW-0] [kiwi] WSPR...

With the current code it doesn't detect when someone is calling a hashed callsign: ` FT8 T233545 DB7.0 DT0.8 F7.075886 F1TXI IN96 : - ` If the regex ` ".+[A-Z0-9/]+\s([A-Z0-9/]+?)\s([A-R]{2}[0-9]{2})$")`...

I think compression should be disabled to get the best audio quality (not sure if it is lossless or lossy compression?) ` 'compression': False, ` in base.py

Free channels reporting when redirecting is active

1

When all channels on the first kiwi are occupied, users get redirected to the second kiwi. But on the kiwisdr.com receiver list/map it is shown that all channels are occupied,...