a-culfw
a-culfw copied to clipboard
heliflieger
Alternative culfw
When trying to compile the firmware for CUBe, compilation stops with a linker error at CUBe bootloader: `/usr/lib/gcc/arm-none-eabi/7.3.1/../../../arm-none-eabi/bin/ld: section .ARM.exidx LMA [0011ccf0,0011ccf7] overlaps section .relocate LMA [0011ccf0,0011d25f] collect2: error: ld...
The last entry in the PA table was set to 0, so instead of a pulse only two short spikes would be transmitted, i.e. instead of _◢◼◼◣_ the generated signal...
Each global variable has to be defined exactly once, declarations need the extern keyword. Move the packetCheckValues definition to rf_receive_bucket.c, likewise for the output_flush_func callback.
Hello, just set up my first selfmade cul with the latest(1.26.0.4) aculfw on an arduino nano v3.0. For some reason the device alyways entered some strange mode when sending commands...
Missing Command "W" for 2nd Stackable_CC-Device: **V 1.24.02 a-culfw** _? (? is unknown) Use one of B b C F i A Z N E k G M K L...
Added possibility to expose first UART of STm32 to usb / network (instead of using it for an attached ESP8266 or as a logging interface)
Is there existing some kind of list where one can find information about the different codes? Like i is for an intertechno message. What means om or s at the...
There is no HMS/LaCrosse emulation in NanoCUL I think it is board.h: # define OFF_LACROSSE_HMS_EMU // if you like HMS emulation for LaCrosse temp devices it should be (without the...
I have 2 Cul (reflashed MAXCUbes) to cover a large building complex. I think, that i loose credits on both of them unneccesary because the two CUL can "see" each...
