helgoboss
Added controller preset for Arturia MiniLab 3
This is the initial mapping, as discussed in https://github.com/helgoboss/realearn/issues/785
Hi! As far as I see you used the same target ( Virtual Multi 1 ) for the black and the first white knob
Was that on purpose or was that a mistake? Because it takes away the functionality of either the black knob or the first white knob
I may also have misunderstood something
Very likely a mistake (unfortunately currently no time to look into it).
Confirmed it's a mistake. I think Enc Black can be safely set to Multi 39 (have tested it)
I just purchased a MiniLab 3, and found this thread. The current firmware supports relative encoders, and I'm wondering if it'll be at all possible to get midi feedback working for them?
@ajohnsonsfx I actually put together a preset that uses the relative midi info. I'm still working through it, but I'd be happy to post it if you like
minilab3-user.json Realearn.minilab3.zip
@ajohnsonsfx Here's what I've got. the JSON is the realearn controller preset and the .minilab3 file is the midi configuration. I setup the CC channels logically and set all the infinite encoders to relative. Just use midi control center to import it. Of course you can modify as you wish, but you may have to relearn the encoders at that point.
if you have any suggestions for edits i'd love to know!
@wellcaffeinated @jonasdiemer Anyone? I need sysex string(s) to send color to MINILAB3 pads
@wellcaffeinated @jonasdiemer Anyone? I need sysex string(s) to send color to MINILAB3 pads
I'd love to know this too... i have no idea...
I found this using a difference checker on Sysex dumps but the individual command doesn't work on it's own apparently.
F0 00 20 6B 7F 42 21 0z 40 yy 01 xx F7
z is User memory slot 1-5 (3-7 Hex) yy is Pad 1-16 (16 - 25 Hex) xx is color (42 color palette - 00-29 Hex)