esphome_components icon indicating copy to clipboard operation
esphome_components copied to clipboard

Published 20 hours ago • verified publisher icon heinekmadsen

pin connections? :)

Open McAndersDK opened this issue 2 years ago • 5 comments

Am i missing something or dont this repo have info about how to connect the board to the genvex? :) I have been looking into the following: Optima 250 and Genvex GE Energy 2 The genvex GE Energy 2 have the following connectors on the mainboard to the Optima 250: L2 image and from the genvex connect documentation I can see the pin outs for the Optima 250: image but im still not sure what to connect to what? :)

So far I have found this: for a nodemcu-32s Board <-> Optima 250 5v <-> power module <-> 23 ground <-> power module <-> C1 rx_pin: GPIO16 <-> ? tx_pin: GPIO17 <-> ?

image

McAndersDK avatar Dec 11 '22 13:12 McAndersDK

Did you get this working?

heinekmadsen avatar Mar 17 '23 09:03 heinekmadsen

no not yet.

McAndersDK avatar Mar 17 '23 09:03 McAndersDK

Well... you need a modbus module. ESP32 -> Modbus module -> Optima Easiest is to buy a complete module. I believe this will work, cutting one end of the RJ45 cable and connect the wires to the optima display. Not sure if it can power the device from the optima display, or if power using the USB port is needed https://ustepper.com/shop/home/18-esphome-modbus-module.html https://github.com/heinekmadsen/esphome_components/blob/main/components/genvexv2/Betjeningsvejledning_Modbus_Communication_OPT250_V3.1_20.11.14_EN.pdf

heinekmadsen avatar Mar 17 '23 10:03 heinekmadsen

Hey again, so is this not good enought? https://arduinotech.dk/shop/ttl-til-rs-485-modul/

McAndersDK avatar Nov 02 '23 21:11 McAndersDK

Not really sure. I’m, not that into the hw part.

Try asking in the Danish Home Assistant or Nilan/Home Assistant facebook groups

From: Anders Andersson @.> Sent: 2. november 2023 22:44 To: heinekmadsen/esphome_components @.> Cc: Heine Koldbro Madsen @.>; Comment @.> Subject: Re: [heinekmadsen/esphome_components] pin connections? :) (Issue #24)

Hey again, so is this not good enought? https://arduinotech.dk/shop/ttl-til-rs-485-modul/

— Reply to this email directly, view it on GitHubhttps://github.com/heinekmadsen/esphome_components/issues/24#issuecomment-1791580333, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ALVECIBJCXNDPCIJWIBVDZTYCQH2JAVCNFSM6AAAAAAS27JME6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTOOJRGU4DAMZTGM. You are receiving this because you commented.Message ID: @.@.>>

heinekmadsen avatar Nov 02 '23 22:11 heinekmadsen