Mark Haslinghuis

@hydra - after second test (cold boot) the board only gets into DFU mode after cloud build. - even happening after flashing the supplied firmware here. - bare board EDIT:...

- Please provide support ID which can be generated on the CLI tab. - Remove DISPLAY feature - and Dashboard from the build.

When not using Dshot telemetry try `set dshot_bitbang = OFF`

What firmware is the ESC running?

Using 32.8 here without problems. 32.10 did not work for me. 32.7 is still the recommended version: https://betaflight.com/docs/wiki/getting-started/hardware/esc-firmware#blheli_32

Take a look at `https://github.com/betaflight/betaflight/pull/7446`

- Now with Dshot telemetry enabled use `set dshot_bitbang = AUTO` instead. - Remove Dashboard if not using an external [O]LED display.

@Strangedave remove OSD_HD from the build.

Perhaps also try 4.5.1-dev (first)

Fixed in [2d3c8ee](https://github.com/betaflight/betaflight/commit/2d3c8eea334752ca085cdaf3c7bb52996c3ef28c)