MISC
MISC copied to clipboard
hartk1213
misc stuff
Hi, do you have any plans to add selectable fan voltage in Toolhead PCB to stealthburner?
It seems that the CAD files are still 2.4r1, not as stated: "Hartk mod update for 2.4r2 (https://github.com/VoronDesign/VoronUsers/pull/638)" Is there a forecast to when the 2.4r2 files uploaded?
Slight issue with the Y Endstop relocation mod, the model is based on the 2.4r1 files and the Z chain mount holes are now different. The 2.4r1 has two mounting...
https://github.com/hartk1213/MISC/blob/cb80a9827a2785d7be50ba889c2c32cd83da447b/Voron%20Mods/Voron%202/2.4/Voron2.4_Pins_Mod/STLs/Gantry/AB_Drive_Units/a_drive_frame_upper_pinned24r2.stl
The sleeves are nearly impossible to install. I think you intended them to be heat inserted but the instructions make no mention of it. I tried filing it to make...
hello do you plan to make something like Frame PCB for your mod FPC Toolhead PCB ?? https://raw.githubusercontent.com/timmit99/Voron-Hardware/V0-Umbilical/V0-Umbilical/Images/Frame_PCB.png
it doesn't seem like anybody actually solves these issues, but there is a serious conflict on the pinout_14_2 or whatever is named and the Octopus wiring diagram. the two are...
In the diagram here:  The picture suggests one should add the 5v jumper, but also clearly shows the 24v present too. Having just blown an Octopus and Pi by...
Mellow's SB2040 uses XT30 plugs. As the XT30 plugs are slightly larger in size than the M12 holes, would it be possible to add a square slotted hole in the...
I'd think that adding a wire from the GND power return of the 4 CAN cable wires to the USB gnd at the CAN side would provide some safety since...
