Till Harbaum

The logs should tell you which device it's reading from and whether it's the floppy or the HDD. In case of the HDD you need a harddisk driver installed in...

The SD card is using a FAT file system which only supports files up to 2 GB. I haven't checked what exfat supports. Does your PC actually see the full...

Another aspect of the ppera drivers and images is that they are closed source and have to be paid for. Thus I don't have access to them and especially cannot...

Fixed in repository. Will be part of the next binary releases.

Not meaning to hijack this. But does the efinix jtag loading work at all? I do have a t20-bga256 demo board and this is IMHO supposed to be supported. `openFPGALoader...

I did a quick investigation on this. openFPGAloader actually loads the bit file and i see its contents arriving on USB (although bit reversed as JTAG is LSB first). But...

That board seems like it should be compatible. But it seems the Galagino sketch doesn't even start running. This in turn suggests that this problem has nothing to do with...

This may actually happen if the esp32 tool chain gets updated and e.g. a library is now slightly bigger. There are several possibilities to deal with this: a) disable a...

Can you post a screenshot? There are slightly different screens which may need a different setup. But your report sounds like you have problems with the SPI transmission.

There are a few things that don't make much sense. The value printed is way too big for a single byte. This often indicates that signed and unsiged are messed...