Hannes Campidell

i have the same problem on archlinux with a pc and my board is a STM32WB55

no this one is a 8 mega byte flash so no such 2 kb constrains (i never saw any smaller that 512 kb) so i hope it will be developed...

yes: https://datasheetspdf.com/pdf-file/792368/Spansion/FL064P/1

so if undertand it right you mean just try to flash it and if it works try to configure it else retry right

ok and i will flash the eeprom with an cha341 and the flashrom software and i dont design a board it is because i have about 5 xprintserver boards and...

i cant find any documentation how to build this for the at91sam9g25 under linux

@ehristev can you help me compile the uboot for the at91sam9g25 chip under linux debian/arch

ok i will try it but i dont have the ek board but i think my board is similar egnuth that it could work

i tried to built it but it says "cc1: Fehler: falscher Wert »armv5te« für Schalter »-march=«" it means "cc1: error: wrong value »armv5te« for switch »-march=«" and a screenshot: ...

i compiled it using a arm sbc and the make option: "CROSS_COMPILE=arm-linux-gnueabi-" and i will flash u-boot.bin to the spi flash chip