WeMos-Lora issues

Ordering new pcbs for WeMos Lora RFM9x Gateway Shield

3

Hi, I have tried several times to order your board from PCBs.io - but it looks like they have issues there. Are your boards available somewhere else?

saysphilippe

BOM missing diodes

1

Hello, Your BOM (at https://octopart.com/bom-tool/MsqCYjTr) is missing the 3 diodes

gvtienen

Older Versions

5

I appear to have a quantity of older "Lora Node Mini" boards for Wemos D1 mini. I bought them about 2 years ago. They do not have a version number...

peterl3233

BOM missing antenna connector

Any advice on the type of antenna connector to put on the PCB? I noticed the BOM is missing that info. I would love to use a SMA or u.fl...

remrat

Pullup resistors on I2C, why?

2

Hi, is there a motive for R1 and R2 (pullup resistors for SDA and SCL)? I'd like to use Wemos pins D1 and D2 for a SoftwareSerial... Thanks

atrent

DIO0 GPIO15 boot fail

Hi, i have an issue, the gateway works perfectly fine but i have a small problem, i have the gpio15 pulled down to ground with a 10k resistor, but if...

A4EVA

SMD component list

3

Hi, could you provide the SMD component list ( with dimensions) ? Thanks.

leocopter

RFM95 disturbes D1 Mini

1

Hi, a friend had a lot of issues to send LORA frames (not lorawan). The rfm-pcb and the d1 mini are stacked. When he send frames, the usb communication is...

weingaunity