No matter how many times i try the code exits after running command "model = load_model(location)" in drive.py

[hemanth2410]

[hemanth2410]

I am guessing the model file is corrupted, after cloning repo the model file is only about 3698 kb

[hadipash]

Hi! Thanks for your inquiry.

The model file is fine, just the procedure of making the program work is a bit complicated. Until now didn't have much time to write a good guideline.

The most important you need to know before you start is that the program works only with Korean version of GTA V due to fonts. Unfortunately, in English version fonts are not monospaced and it made difficult to read important information from the screen.

Then, you also need to consider next:

1. The code was tested in PyCharm and might not work with python idle (you can download PyCharm for free using student subscription https://www.jetbrains.com/student/)
2. The code was tested using python 3.6. You might want to switch to that version.
3. The code 100% does not work with anaconda (in fact, tensorflow officially has no support in anaconda).

Let me know if you still have problems.

[hemanth2410]

Thanks for the help sir

Get Outlook for Androidhttps://aka.ms/ghei36

---

From: Rustam [email protected] Sent: Friday, February 22, 2019 3:18:03 PM To: hadipash/AI_GTA5 Cc: hemanth sattenapalli; Author Subject: Re: [hadipash/AI_GTA5] No matter how many times i try the code exits after running command "model = load_model(location)" in drive.py (#3)

Hi! Thanks for your inquiry.

The model file is fine, just the procedure of making the program work is a bit complicated. Until now didn't have much time to write a good guideline.

The most important you need to know before you start is that the program works only with korean version of GTA V due to fonts. Unfortunately, in English version fonts are not monospaced and it made difficult to read important information from the screen.

Then, you also need to consider next:

1. The code was tested in PyCharm and might not work with python idle (you can download PyCharm for free using student subscription https://www.jetbrains.com/student/)
2. The code was tested using python 3.6. You might want to switch to that version.
3. The code 100% does not work with anaconda (in fact, tensorflow officially has no support in anaconda).

Let me know if you still have problems.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/hadipash/AI_GTA5/issues/3#issuecomment-466338733, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AXKcpvNc4NSi8zyxOGKDqvVxfzzI8hJOks5vP7zTgaJpZM4bIFZj.

[hemanth2410]

so far i can see only lanes, but i dont see any boxes surrounding people, traffic lights etc

[hadipash]

Now, to run the model need to adjust some parameters. Because tuning depends on several conditions including your hardware (GTA V outlook differs from version to version and hardware), it is better to do it through pm. Could you message me through linkedin?

[Duskfall]

Hello, thanks for the great repo! Using Python 3.6, Pycharm 2018.3.5 Windows 10 tensorflow_gpu-1.13.1 Installed darkflow globally with pip install . after cloning the project How can I use the auto drive mode? I get to Arrived at destination when pressing T. Also I only see the boxes instead of the lanes

[hemanth2410]

try setting marker on map and then press T on keyboard.

and please make sure that you are in first person move (Hood camera).

and paint both primary and secondary colors to matte black.

enable speed info (KMPH only) from sample trainer.

this worked for me

and thanks hadipash for guiding me.

[Duskfall]

@hemanth2410 can you plz clarify those 2? :P

and paint both primary and secondary colors to matte black.

enable speed info (KMPH only) from sample trainer.

[hemanth2410]

step 1-> install openIV and select GTA 5 location in it. step 2 -> Enable Edit mode step 3 -> Go to x64a.rpf step 4 -> Go to textures folder step 5 -> (Right click) on graphics.ytd and select edit step 6 -> Search for radarmasksm step 6 -> replace it with https://1drv.ms/u/s!Au9TCMuJ7_EbhvVjoQVV5xXwzgIjnQ step 7 -> remove any trainers that you have previously installed. step 8 -> install this trainer to gta 5 https://www.gta5-mods.com/scripts/simple-trainer-for-gtav step 9 -> press F4 to open trainer menu step 10 -> Use your number pad keys to navigate in menu. step 11 -> go to vehicle spawning -> sports -> select Lampadati Furore GT. step 12 -> go into vehicle options in trainer menu -> vehicle color oprions. step 13 -> select matte black for both primary and secondary color options. step 14 -> go to general options and select display speed info KMPH step 15 -> make sure that you are running game in 800 x 600 windowed mode. step 16 -> identify speed. https://1drv.ms/u/s!Au9TCMuJ7_EbhvVktW3jjxmI82rxFQ step 17 -> vis = image[568:576, 681:700, :] step 18 ->

you should get output something like this.

step 19 -> make sure that you set values like 576-568 = 8 px and 700-681 = 19 px. the values of width and height should be 8 and 19. step 20 -> if you got this far then you are probably ready to perform self driving step 21 -> in repo folder go to object_detection -> object_Detect.py, under # set yolo options change gpu value to 0.4 step 22 -> save the py file. step 23 -> now set waypoint on map. step 24 -> run drive.py code.

optional steps if Gpu is <= 4GB

step 25 -> if you have ssd try running code on ssd. step 26 -> tune gpu value in object_detect.py

[hemanth2410]

@hadipash any plans in upgrading this code, sir?

[hadipash]

@hemanth2410 As much as I would love to improve this project, I simply don't have time for this. So, no plans on any upgrades.