Converter continued from #498

[MrKillerShaunBa]

trafficstars

Submission Checklist:

• [Y ] I am a current high school, middle school, or home schooled student.

  • [Y ] I have filled out the verification form

• [ Y] I have joined the #electronics channel on Slack

• [ Y] I made this board from scratch, even if I followed a tutorial

• [ Y] I have followed the directions in README.md

  • [ Y] Created a folder under onboard/projects
  • [ Y] Filled out TEMPLATE.md as README.md
  • [Y ] Uploaded Gerber.zip and Schematic.pdf
  • [Y ] Created a folder called src and uploaded design files
  • [Y ] Uploaded screenshot of PCB order with all costs included
  • [ Y] I am ordering the smallest batch size (ie. JLCPCB's smallest order is for 5 boards)
  • [NA ] If outside the US I've checked that I can afford the customs charges in my country (which isn't covered by the grant)

• [ Y] (Optional) This project is from a tutorial[^1].

• [ NA] (Optional) I'm in a FIRST (FRC, FTC, FLL, etc.) team. The number is: ____

[^1]: Projects from a tutorial are 100% fine! We just want to ask so we can count how people are using tutorials.

[prophetorpheus]

Hi, I'm Orpheus Leap! Here to help you review your PR.

projects/W_SLA_CONVERTER:

Required files

✅	README.md	A description of your project
✅	cart.png
✅	gerber.zip
✅	schematic.pdf	Manually check schematic.pdf
✅	Source files - EasyEDA	Found both PCB and SCH files

You can view a render of your board over on gerber.zip/2d!

Happy OnBoarding! _{This bot is a simpler helper for common submission types. If there's an error with this, please point it out and someone from the OnBoard team will look at it manually.}

[MrKillerShaunBa]

@maxwofford This is continuing from #498 PR, I removed the 2 SLAs but I have to hurry so I took DHL Speed Economy.

[MrKillerShaunBa]

Still, the price is better.

[MrKillerShaunBa]

Mr. Prophet saw my old files as well, I will try to delete them

[MrKillerShaunBa]

@maxwofford @karmanyaahm im unable to delete them, pl help...

[MrKillerShaunBa]

On Mon, 29 Apr 2024 at 11:09 PM, Prophet Orpheus @.***> wrote:

Hi, I'm Orpheus Leap! Here to help you review your PR.

Found multiple files named README.md. Please only provide one per PR. Make seperate PRs for multiple independent projects. Happy OnBoarding! This bot is a simpler helper for common submission types. If there's an error with this, please point it out and someone from the OnBoard team will look at it manually.

— Reply to this email directly, view it on GitHub https://github.com/hackclub/OnBoard/pull/518#issuecomment-2083291715, or unsubscribe https://github.com/notifications/unsubscribe-auth/A5H5IQPPEXZ37VULJ4GAQRDY72AUDAVCNFSM6AAAAABG6YLCKWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOBTGI4TCNZRGU . You are receiving this because you authored the thread.Message ID: @.***>

@MaxWofford hellp -- Sent from mail.google.com.

[MrKillerShaunBa]

@maxwofford ?

[MrKillerShaunBa]

@maxwofford Files are complete, PLEASE CHECK MINE IT IS CONT.. OF #498

[MrKillerShaunBa]

On Thu, 2 May 2024 at 12:51 AM, Max Wofford @.***> wrote:

@.**** requested changes on this pull request.

Nice job on the redesign @MrKillerShaunBa https://github.com/MrKillerShaunBa! Can you please clean up your files by deleting the files in the old folder?

Also, your board ended up being pretty expensive due to how big it is. The converters I made in the video are about the size of my thumb, and if you have a board that acts as 2 converters I bet you can get it down to the size of 2 thumbs! Maybe try that out to get your board under the $70 threshold?

— Reply to this email directly, view it on GitHub https://github.com/hackclub/OnBoard/pull/518#pullrequestreview-2034297545, or unsubscribe https://github.com/notifications/unsubscribe-auth/A5H5IQLIDRHI5DBYV4V2EILZAE6FLAVCNFSM6AAAAABG6YLCKWVHI2DSMVQWIX3LMV43YUDVNRWFEZLROVSXG5CSMV3GSZLXHMZDAMZUGI4TONJUGU . You are receiving this because you were mentioned.Message ID: @.***>

I deleted as many files I could, I was unable to do the rest. And I need these boards urgently so I am currently unwilling to do a full redesign and place another PR order so plz give HCB grant asap. (JLCPCB is knocking my email)-- Sent from mail.google.com.

[MrKillerShaunBa]

@maxwofford

[MrKillerShaunBa]

Mr. @maxwofford please comment...

[MrKillerShaunBa]

Yes, I did that on purpose, I wanted it look like a credit card. And speaking about parts and assembly, the reason of it being high is that I couldn't find many components and slack was not helpful either. And grant was for $100 i think

[maxwofford]

The grant is for $100 if you made your own board from scratch, but $50 for using a tutorial– $100 should be enough for people to make multiple projects, so we capped tutorial projects at $50 to make sure people don't blow their budget on their first design.

There have been multiple designs made for less than $50 that are larger than a credit card, so I'd assume the cost comes from the specific USBs chosen or the jellybean parts (resistors/capacitors/etc) being in the extended parts list. I don't see your design posted in the Slack electronics channel.

[MrKillerShaunBa]

On Wed, 15 May 2024 at 10:04 PM, Shaunak Bajaj @.***> wrote:

On Mon, 13 May 2024 at 8:53 AM, Max Wofford @.***> wrote:

The grant is for $100 if you made your own board from scratch, but $50 for using a tutorial– $100 should be enough for people to make multiple projects, so we capped tutorial projects at $50 to make sure people don't blow their budget on their first design.

There have been multiple designs made for less than $50 that are larger than a credit card, so I'd assume the cost comes from the specific USBs chosen or the jellybean parts (resistors/capacitors/etc) being in the extended parts list. I don't see your design posted in the Slack electronics channel.

— Reply to this email directly, view it on GitHub https://github.com/hackclub/OnBoard/pull/518#issuecomment-2106563827, or unsubscribe https://github.com/notifications/unsubscribe-auth/A5H5IQOUUQBI5IVQZOZD7WTZCAW3LAVCNFSM6AAAAABG6YLCKWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMBWGU3DGOBSG4 . You are receiving this because you were mentioned.Message ID: @.***>

But basically I just tweaked the components sooo I think I qualify for $100 grant? And I had posted a question regarding parts in the slack

-- Sent from mail.google.com.

[MrKillerShaunBa]

@maxwofford plzz comment

[MrKillerShaunBa]

On Wed, 15 May 2024 at 10:05 PM, Shaunak Bajaj @.***> wrote:

On Wed, 15 May 2024 at 10:04 PM, Shaunak Bajaj @.***> wrote:

On Mon, 13 May 2024 at 8:53 AM, Max Wofford @.***> wrote:

The grant is for $100 if you made your own board from scratch, but $50 for using a tutorial– $100 should be enough for people to make multiple projects, so we capped tutorial projects at $50 to make sure people don't blow their budget on their first design.

There have been multiple designs made for less than $50 that are larger than a credit card, so I'd assume the cost comes from the specific USBs chosen or the jellybean parts (resistors/capacitors/etc) being in the extended parts list. I don't see your design posted in the Slack electronics channel.

— Reply to this email directly, view it on GitHub https://github.com/hackclub/OnBoard/pull/518#issuecomment-2106563827, or unsubscribe https://github.com/notifications/unsubscribe-auth/A5H5IQOUUQBI5IVQZOZD7WTZCAW3LAVCNFSM6AAAAABG6YLCKWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMBWGU3DGOBSG4 . You are receiving this because you were mentioned.Message ID: @.***>

But basically I just tweaked the components sooo I think I qualify for $100 grant? And I had posted a question regarding parts in the slack

-- Sent from mail.google.com.

@MaxWofford

-- Sent from mail.google.com.