Road Map

[DusKing1]

Achieved:

• [x] Add two CRSF "trigger" packets - make the FC arm/disarm
• [x] Add button detector - pressed/released
• [x] Add support for Sony Multi-Terminal protocol
• [x] Improve UI
• [x] Provide an easy-to-go DIY board - then hook up a betaflight FC
• [x] Add "EEPROM" and "menu" for changing some settings and saving that after powering off
• [x] Improve "menu" logic and UI
• [x] Make Sony camera can work in MASTER/SLAVE mode
• [x] Add ADC reading
• [x] Allow PAGE to check battery voltage during recording
• [x] Sign "device_mode" with actual device behaviour
• [x] Add support for "audio sync" - put sync signal on both camera's audio track and on FC's throttle (maybe roll pitch or yaw alternatively) channel, requires a new CRSF packet
• [x] Add support for Momentary Ground
• [x] Add support for Schmitt trigger
• [x] Add support for ZCAM UART protocol

In plan:

• [ ] Add support for LANC protocol
• [ ] Add support for HDMI CEC protocol
• [ ] Add support for RED protocol: link

Final goal:

• [ ] small size motion logger box, easy to mount, easy to use