HVAC - AS35RBAHRA-PL - Cannot set vertical/horizontal vent position

[byadii22]

All integration works like a charm, except one: Cannot set vent position (horizontal/vertical), but i can swing it in these axis or mix swings. Entities:

If i show program details, i can see vent positions, take a look at example :

Program [iot_cool]
Parameters:

screenDisplayStatus: [0 - 1] - Default: 1 - Step: 1
echoStatus: [0 - 1] - Default: 0 - Step: 1
tempSel: [16 - 30] - Default: 22 - Step: 1
silentSleepStatus: [0 - 1] - Default: 0 - Step: 1
muteStatus: [0 - 1] - Default: 0 - Step: 1
rapidMode: [0 - 1] - Default: 0 - Step: 1
healthMode: [0, 1] - Default: 0
selfCleaning56Status: [0 - 1] - Default: 0 - Step: 1
selfCleaningStatus: [0 - 1] - Default: 0 - Step: 1
windSpeed: [1, 2, 3, 5] - Default: 5
windDirectionVertical: [2, 4, 5, 6, 8] - Default: 5
windDirectionHorizontal: [0, 3, 4, 5, 6, 7] - Default: 0

Last two lines looks like thing i want to set.

Feel free to contact and troubleshoot it.

[gvigroux]

You can change this parameter in the default UI

[byadii22]

Hi, sorry for delay. I know that, but i have only options for change moving mode, like 'move up/down', 'move right/left' or 'move in all directions' - swing options only. My question was to choose fixed position, like 'fix to position left' or 'fix to position up', precisely: to pick one options from this array:

windDirectionVertical: [2, 4, 5, 6, 8] - Default: 5 windDirectionHorizontal: [0, 3, 4, 5, 6, 7] - Default: 0

[gvigroux]

I have a mapping tables for all values:

class ClimateSwingVertical: AUTO = "8" VERY_LOW = "7" LOW = "6" MIDDLE = "5" HIGH = "4" HEALTH_LOW = "3" VERY_HIGH = "2" HEALTH_HIGH = "1"

class ClimateSwingHorizontal: AUTO = "7" MIDDLE = "0" FAR_LEFT = "3" LEFT = "4" RIGHT = "5" FAR_RIGHT = "6"

Like that you know the value to send :)