guzu
Add "Samsung SSD 830 Series" drive
SAMSUNG MZMPC128HBFU-000 在使用hddtemp的时候报no sensor，但在Windows下能正常获取温度信息。 Samsung mzmpc128hbfu-000 reports no sensor when using hddtemp, but it can normally obtain temperature information under windows.
root@pve:~# hddtemp /dev/sd? WARNING: Drive /dev/sda doesn't seem to have a temperature sensor. WARNING: This doesn't mean it hasn't got one. WARNING: If you are sure it has one, please contact me ([email protected]). WARNING: See --help, --debug and --drivebase options. /dev/sda: SAMSUNG MZMPC128HBFU-000 : no sensor
Please send
# hddtemp /dev/sda --debug
and
# smartctl -a /dev/sda
(from smartmontools package)
if possible
root@pve:~# hddtemp /dev/sda --debug
================= hddtemp 0.3-beta15 ================== Model: SAMSUNG MZMPC128HBFU-000
field(5) = 0 field(9) = 216 field(12) = 70 field(177) = 6 field(179) = 0 field(181) = 0 field(182) = 0 field(183) = 0 field(187) = 0 field(190) = 51 field(195) = 0 field(199) = 0 field(235) = 60 field(241) = 9
If one of the field value seems to match the temperature, be sure to read the hddtemp man page before sending a report (section REPORT). Thanks. root@pve:~# smartctl -a /dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.30-2-pve] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION === Device Model: SAMSUNG MZMPC128HBFU-000 Serial Number: S0YLNYAC205818 LU WWN Device Id: 5 002538 043584d30 Firmware Version: CXM03B1Q User Capacity: 128,035,676,160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 T13/2015-D revision 2 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Aug 15 19:06:51 2022 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled
=== START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED
General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 540) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 9) minutes.
SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 728 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 70 177 Wear_Leveling_Count 0x0013 099 099 000 Pre-fail Always - 6 179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0032 048 031 000 Old_age Always - 52 195 Hardware_ECC_Recovered 0x001a 200 200 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x003e 253 253 000 Old_age Always - 0 235 Unknown_Attribute 0x0012 099 099 000 Old_age Always - 60 241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 457310361
SMART Error Log Version: 1 No Errors Logged
SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Please send
# hddtemp /dev/sda --debugand# smartctl -a /dev/sda(from smartmontools package) if possible