Add WDC WD10EZEX-60M2NA0 (Western Digital Blue 1TB)

[ellyq]

WARNING: Drive /dev/sdb doesn't seem to have a temperature sensor.
WARNING: This doesn't mean it hasn't got one.
WARNING: If you are sure it has one, please contact me ([email protected]).
WARNING: See --help, --debug and --drivebase options.
/dev/sdb: WDC WD10EZEX-60M2NA0:  no sensor

================= hddtemp 0.3-beta15 ==================
Model: WDC WD10EZEX-60M2NA0

field(1)	 = 0
field(3)	 = 249
field(4)	 = 49
field(5)	 = 0
field(7)	 = 0
field(9)	 = 198
field(10)	 = 0
field(11)	 = 0
field(12)	 = 18
field(183)	 = 0
field(184)	 = 0
field(187)	 = 0
field(188)	 = 20
field(190)	 = 29
field(192)	 = 241
field(193)	 = 196
field(196)	 = 0
field(197)	 = 0
field(198)	 = 0
field(199)	 = 0
field(200)	 = 0

If one of the field value seems to match the temperature, be sure to read
the hddtemp man page before sending a report (section REPORT). Thanks.

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD10EZEX-60M2NA0
Serial Number:    ***
LU WWN Device Id: 5 0014ee 20b6f93d6
Firmware Version: 03.01A03
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Feb 10 23:18:35 2022 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

190 Airflow_Temperature_Cel 0x0022 071 053 040 Old_age Always - 29 (Min/Max 29/29)