3.11 installation |Failed : Retrying : Wait for ServiceMonitor CRD to be created

[shubhamgupta514]

@marekjelen @gshipley

I am getting error while installing openshift 3.11 Failed : Retrying : Wait for ServiceMonitor CRD to be created

Thanks, Shubham Gupta

[shubhamgupta514]

Opened a PR with full information in Openshift-ansible repo also 3.11 installation |Failed : Retrying : Wait for ServiceMonitor CRD to be created #10534

[clipod]

I was able to resolve this issue. It took a while for me to figure it out. In /etc/sysconfig/network-scripts/ifcfg-eth0 change the parameter 'NM_CONTROLLED'=no to 'NM_CONTROLLED'=yes.

What we are doing here is to give control of this eth0 to the NetworkManager. Generally if your ansible ran and failed at this stage that mean NetworkManager is active. If not, you have to umask that service. Below commands can do that. systemctl unmask NetworkManager-dispatcher.service systemctl unmask NetworkManager-wait-online.service systemctl unmask NetworkManager.service

Let me know how it went.

[BraianNunes]

Same here. Did you fix that?

[shubhamgupta514]

Issue Fixed with the above workaround. Please close this PR

[BraianNunes]

@shubhamgupta514 Are you using RHEL 7x? This workaround doesn't work for me.

[mmgil]

Same issue here! Any help? Using centos 7.6 with openshift-origin.

[alex8158]

Same issue here! I have config the parameter 'NM_CONTROLLED'=no to 'NM_CONTROLLED'=yes. but the issue still appear. Using centos 7.6 with openshift-origin.

[likai0928]

Same issue here! Using centos 7.6 with openshift-origin311. NM_CONTROLLED'=no to 'NM_CONTROLLED'=yes doesn't work for me

[sunnyguohua]

Same issue here! Using RHEL 7.6 with openshift-3.11.98. NM_CONTROLLED'=no to 'NM_CONTROLLED'=yes doesn't work for me