home-assistant-eltako
home-assistant-eltako copied to clipboard
grimmpp
Integration for Eltako 14 series in Home Assistant
After upgrading to 2024.5.0 I encountered an issue with your integration. The integration crashed on first use after a reboot of HA. I think the problem has something to do...
Support for [MGW Gateway](https://www.piotek.de/PioTek-MGW-POE) wanted!
After Update following log attemps Logger: homeassistant.setup Quelle: setup.py:296 Erstmals aufgetreten: 17:31:50 (1 Vorkommnisse) Zuletzt protokolliert: 17:31:50 Setup failed for custom integration 'eltako': Unable to import component: cannot import name...
Sent by [tden159](https://community.home-assistant.io/u/tden159) in [HA Community](https://community.home-assistant.io/t/eltako-baureihe-14-rs485-enocean-debugging/49712/355?u=philipp14). after the release of v1.4. i tried out your solution with an USB300 as my gateway. I was able to integrate all my lights...
I want to be able to define the tilt position for my shutters in HA. https://www.home-assistant.io/integrations/cover/ https://developers.home-assistant.io/docs/core/entity/cover/
It would be great if Support for eltako fsb12 could be supported. https://github.com/mak-gitdev/HA_enoceanmqtt/discussions/99 I have a usb300 and ready to do some testing if needed.
The log file reports a lot of early warnings like this: 2024-02-02 20:22:24.686 WARNING (MainThread) [homeassistant.const] DEVICE_CLASS_AQI was used from eltako, this is a deprecated constant which will be removed...
Cover is driving all the way up or down until end position, if a small position correction is needed
I would like to suggest some modifications I have made to your integration and in more detail to the covers part. The goal of these changes is to prevent the...
I followed the documentation but I do not know how to connect to my LAN Gateway. The doc says: `eltako: gateway: - id: 1 device_type: mgw-lan base_id: FF-80-80-00 # baseId...
Is it possible to add the option to manually specify the serial device path? Would this allow serial devices to be connected via ser2net? Since I've run into USB stability...
