David Torrens

My V1 been in cupboard a while but now got working although getting it to work complicated by issues with finding right versions of software and instructions. (Will be posting...

Yes could be would have to deviise a way to switch modes using the two different demos as a basis. I have had a go with the "assistant_library_with_local_commands_demo.py" but every...

If you use PWm ... See https://github.com/pimoroni/fanshim-python/issues/22 then you can set the lower temperature to about 58 and the fan will come on at a slow speed which might reassure...

I intend to try implementing PWM and I wondered what effect would be on the fan. I would think if the right PWM frequency and control algorithm is chosen (any...

I have PWM working OK but I had to play around quite a bit with the pwm frequency and the algorithm. With that arrangement I have not had to put...

First of all apologies for not answering earlier as I have been traveling. I do have a set of PWM code that works and its fairly Modularized so not hard...

Scripts now uploaded to https://www.smalle.uk/r-pi-4-blog where you can see the results of the code running live as of now. (1400hrs Oct 17th) and you can download the python etc. It...

Have now reached a settled state with my PWM control of the Fanshim and have made sure all my install instructions are sorted. To try this yourself either go to...

Have now done version on Pimorini Software so operates as per their version but instead of running at 100% runs at (say) 70% so nice and quiet. This followed some...

For pimorii software with a tiny mod so fan run quiet at 70 % see https://github.com/grayerbeard/fanshim-python from which you can clone the working version. Although the cooling effect is around...