Add muting to remote control

[Sasszem]

Adds "MUTE" to both L and l commands. Setting it to any value other than 0 mutes the audio, querying it results in 1 if audio is muted, else 0.

[kukabu]

Hello The "MUTE" must be in U/u commands. see https://hamlib.sourceforge.net/html/rigctl.1.html

[Sasszem]

I'm not 100% convinced that's the case, but will change it so when I get around to it.

Michael Tatarinov @.***> ezt írta (időpont: 2024. szept. 26., Cs 4:52):

Hello The "MUTE" must be in U/u commands. see https://hamlib.sourceforge.net/html/rigctl.1.html

— Reply to this email directly, view it on GitHub https://github.com/gqrx-sdr/gqrx/pull/1377#issuecomment-2375702250, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACINK7HEP7KWTYM6CAJAK3LZYNZGXAVCNFSM6AAAAABO25SOKKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGNZVG4YDEMRVGA . You are receiving this because you authored the thread.Message ID: @.***>

[Sasszem]

Hello The "MUTE" must be in U/u commands. see https://hamlib.sourceforge.net/html/rigctl.1.html

Did this change. Also found a problem with the uninitialized bool variable.

[argilo]

This needed a rebase and a bit of cleanup, so I did that and manually merged. The changes are now on the master branch.