edgetpu
edgetpu copied to clipboard
Coral issue tracker (and legacy Edge TPU API source)
Hello all, I have installed DEBIAN "bookworm" in the latest version: 5.18.0-3-amd64 #1 SMP PREEMPT_DYNAMIC Debian 5.18.14-1 (2022-07-23) x86_64 GNU/Linux on my computer. Until recently I was able to use...
Hi, Here are some log details with Linux Machine. ``` bash enable_lk_fastboot.sh ********************************************************************** Unable to connect to debug board, check connection or manually toggle GPIO. ********************************************************************** /tmp/tmp.A2frymb1B7 ~/Downloads/excelsior-eagle-20201210233645 INFO: pySerial...
I own the B+M M.2 version for some time, and it was working fine with a cheap M.2 > PCIe X4 Adapter (N-M2X4) in my old system. To save some...
### Description Working with the Coral SOM i accidentaly erased u-boot from the system. I'm trying to flash directly to the eMMC with the u-boot that is provided by google...
Hi everyone, I have a CT-MCL01 premio motherboard with 1x M.2 (E Key, PCIe x2). After installing the driver and libraries only one tpu shows up. `lspci -nn` System peripheral...
Tensorflow 2.9.1, edgetpu_compiler 16.0 ERROR: Didn't find op for builtin opcode 'CONV_2D' version '6'. An older version of this builtin might be supported. Are you using an old TFLite binary...
### Description Hello, I am checking the schematics for Dev Board. In sheet number six you can find the pinout for the micro-SD slot. My question is that why you...
I'm using the mini-pcie version with [this](https://www.amazon.com/Ableconn-PEX-MP117-Mini-PCI-Adapter/dp/B07JBCL1CJ) Ableconn adapter that has multiple reports of working. It is in Dell PowerEdge T420 running ESXi, and being passed through to a Ubuntu...
Each Coral product has been tested with specific hardware and software versions. \ These development systems must be connected to a host computer: Product | Host Operating System --------- |...
### Description After an illegal power off, my Coral Dev Board Mini have not been able to boot up. The attached [CoralDevBoardMini_Boot_Failed.txt](https://github.com/google-coral/edgetpu/files/9026513/CoralDevBoardMini_Boot_Failed.txt) is the log message when booting got from...