ha-knmi

ha-knmi copied to clipboard

Implement reconfigure step

3

### Did you read the instructions? - [X] I have read the [README](../blob/main/README.md), including the [known-limitations](../blob/main/README.md#known-limitations) section. ### The request See blog post https://developers.home-assistant.io/blog/2024/03/21/config-entry-reconfigure-step/ ### Additional information _No response_

golles

Suggestion to work around failed updates

3

Hi @golles, perhaps this could be an idea? Ideally the API is 'fixed' to return non-corrupt json, but there might be other reasons too why the API would not be...

jcjveraa

sensor.knmi_omschrijving adds period ( . ) after "Regen" but not with others

7

### Did you read the instructions? - [X] I have read the [README](../blob/main/README.md), including the [known-limitations](../blob/main/README.md#known-limitations) section. ### The problem Well, the subject says it all 😄   ###...

hmmbob

Temperature Sensor Values Fluctuate Wildly

9

### Did you read the instructions? - [X] I have read the [README](../blob/main/README.md), including the [known-limitations](../blob/main/README.md#known-limitations) section. ### The problem The sensor values for temperature are fluctuating strangely. Sometimes they...

Zendio

Strange values knmi_globale_stralingsintensiteit sensor

7

### Did you read the instructions? - [X] I have read the [README](../blob/main/README.md), including the [known-limitations](../blob/main/README.md#known-limitations) section. ### The problem At the start and end of the day knmi_globale_stralingsintensiteit gives...

HiDiHo01

Weather data not correct (location)

7

### Did you read the instructions? - [X] I have read the [README](../blob/main/README.md), including the [known-limitations](../blob/main/README.md#known-limitations) section. ### The problem I have provided the configuration with the LAT / LON...

martijntenpas

IPv6 issue

4

Finally got it reinstalled and working again. As far as I can tell it's an IPv6 issue. Changing IPv6 settings in HA so connection to api goes over IPv4 seems...

golles

Update pip requirement from <24.2,>=21.0 to >=21.0,<24.3

3

Updates the requirements on [pip](https://github.com/pypa/pip) to permit the latest version. Changelog Sourced from pip's changelog. 24.2 (2024-07-28) Deprecations and Removals Deprecate pip install --editable falling back to setup.py develop when...

dependabot[bot]