nrf24_multipro
nrf24_multipro copied to clipboard
goebish
walkera 2401
hi , i have one nrf24 for my jr TX , so please is possibile use it with walkera micro hely ? now i use walkera 2401 tx for this walkera micro hely . regards
that's not possible, Walkera protocols are using a CYRF6936 transceiver, not the NRF24L01
4-in-1 Multi Protocol Module: https://github.com/pascallanger/DIY-Multiprotocol-TX-Module
hi dear than you again , I have a DSMX / DSM2 2.4GHz module I read in the link that you sent me that it is possible to load the walkera firmware on this module, do you know this procedure?
That's probably possible with the OrangeTX module, procedure is here: https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/docs/Compiling_OrangeTx.md and here: https://openrcforums.com/forum/viewtopic.php?f=40&t=8753 I don't know how it works exactly, read the procedure on github first, then come here if you need further help: https://www.rcgroups.com/forums/showthread.php?2165676-DIY-Multiprotocol-TX-Module
you're great thank you , now I read everything and I'll let you know. regards
hi dear , i have received my jumper jp4in1 multprotocol module but i have tried to bind cx10 but nothing so i have also tried with my walkera micro Hely ( i have 2401tx) and also nothing ! so please i need help about the DIAL selection wheel and I would like to know how do I recognize the direction of the wheel? I don't understand which DIAL I'm selecting! I also tried the procedure to turn off the green LED but I can't do this either and the green light is always on. My radio is a JR xp9303 (H). Thanks for your help
Sorry, this git isn't about the Multi Protocol Module, you can ask your question here: https://www.rcgroups.com/forums/showthread.php?2165676-DIY-Multiprotocol-TX-Module
Also, not every version of the CX10 is compatible with those modules, maybe yours isn't supported (yet).