nrf24_multipro icon indicating copy to clipboard operation
nrf24_multipro copied to clipboard

FuriBee H36

Open timmyhadwen opened this issue 8 years ago • 6 comments

Seems to be a different protocol to the JJRC H36 :(

Ill try and get some caps :)

timmyhadwen avatar Jan 19 '17 10:01 timmyhadwen

Looks like there's nothing much to capture ... Seems the MCU and the RF are in the same chip, no external SPI bus ...

goebish avatar Jan 19 '17 11:01 goebish

have you been able to see any marking on the cpu? Maybe there will be a datasheet for this one ( unrelated to the protocol issue )

silver13 avatar Jan 19 '17 21:01 silver13

Seems there's no marking except on the MPU: https://www.rcgroups.com/forums/showpost.php?p=36437721

goebish avatar Jan 20 '17 00:01 goebish

Cool, that's the only pic I have found so far, not really very likely to find the datasheet for it, I hope the protocol gets reversed, it would be a challenge if both tx and rx are single ic

silver13 avatar Jan 20 '17 10:01 silver13

The Tx might have a separate RF chip on the other side of the board, looks like there's a 5 pin header.

edit: no, I'm wrong, the antenna is directly connected to the chip that's visible on the picture.

goebish avatar Jan 20 '17 12:01 goebish

does the tx chip have any markings? Anyway I have one in mail, I guess I'll check when it arrives

silver13 avatar Jan 20 '17 21:01 silver13