nobody

Hi @TPU2020 > I've even tried $ sudo dpkg --force-all -i ardu... > > `Unpacking arducam-nvidia-l4t-kernel (4.9.140-32.4.3-20200721164156) ... > dpkg: arducam-nvidia-l4t-kernel: dependency problems, but configuring anyway as you requested: >...

Hi @TPU2020 It seems that the driver has been successfully installed, but it does not detect the camera, which is most likely caused by a loose cable or a wrong...

Hi @johanso-au > Also have the same "No Cameras Available" error, however the cameras can be viewed by opening /dev/video0 and /dev/video1 through VLC. Jetvariety series does not support nvarguscamerasrc,...

@TPU2020 Can you provide a hardware connection diagram? I can confirm that there is no problem with the driver. By the way, are you using the official Raspberry Pi camera?...

It seems that force installation will prompt a dependency problem. I repackaged the deb package based on 20200924161919 dependency. https://github.com/ArduCAM/MIPI_Camera/releases/download/v0.1/20200924161919.zip

Hi @GTRedE l4t32.4.4 has been updated https://github.com/ArduCAM/MIPI_Camera/releases/tag/v0.0.1

Hi @johanso-au For NX, you need to manually modify these depths from 10 to 16: https://github.com/ArduCAM/MIPI_Camera/blob/41523d0c7d57209b0d1c5c941b2e6d9a41514bfc/Jetson/Jetvariety/example/utils.py#L68 We are very sorry for this problem, it will be fixed soon.

Hi @johanso-au Sorry for the late reply, are you using the system installed by SDCard Image or NVIDIA SDK Manger?

Hi @johanso-au I believe you downloaded the driver of Jetson Xavier NX, not Nano. This is the driver for Jetson Nano: https://github.com/ArduCAM/MIPI_Camera/releases/download/v0.0.1/arducam-nvidia-l4t-kernel_4.9.140-32.4.4-20201026143033_arm64.deb

Hi @galdalali Very strange phenomenon, I cannot reproduce your situation. I tried to google this problem and found a similar situation. Can you try it? https://forums.developer.nvidia.com/t/libargus-fails-on-re-entry-if-killed/82388