Guo-Rong

> When adjusting time values the touch area for each number to roll them up or down is too small and your finger covers the number you are changing so...

@hijae Please test and ensure things are working as you expect (I changed quite a lot :face_with_diagonal_mouth:) I'm doing a battery life test on an M5StickC Plus2 just to see...

> I'm doing a battery life test on an M5StickC Plus2 just to see how long it lasts continuously reconnecting ... I managed to get just under 2 hours continuous...

> > I'm doing a battery life test on an M5StickC Plus2 just to see how long it lasts continuously reconnecting ... > > I managed to get just under...

> I think it's a great idea, because I'm using 18650 HAT(M5StickC 18650C) to get more battery life. This one? https://shop.m5stack.com/products/m5stickc-18650 If so, that's 2200mAh, for a total of 2400mAh....

> I've used it for about 12 hours straight, but if you need a longer test, I'll do it. Not necessary, but thank you for offering. I was interested in...

A few questions, so a few replies. > I have a Nikon camera(Z30), and want control it. I think it will be supported(because it can use ML-L7). Yes, the Z30...

> Many thanks for your detail replies, and thanks for your project and dedication. Thank you for the kind words, you are most welcome. > Unfortunately, I use `M5StickC Plus2`...

> [@gkoh](https://github.com/gkoh), many thanks for your work! You are most welcome 👍 > I took a look at the nikon-smart-device-support branch and it looks like that you completed the smart...

> [@gkoh](https://github.com/gkoh), when I receive the camera, I'll try to get the HCI log! @herrfrei Great! The Z6III should be new enough for us to either: * make it work...