Jason Gin

As much as I want EPR support, the requirements to support it are beyond what I can do with the Lua scripting system, unfortunately. The hardware is only rated to...

For what it's worth, if the tester were to get EPR support, DingoCharge in its current state would theoretically support PD3.1 AVS mode, as long as the API were to...

Reopening issue; a new Shizuku firmware just released (version 1.00.62) which indicates that support for EPR/AVS has been added: https://yk-lab.org:666/wp-downloads/downloads/shizuku/firmware/changelog-en-us.txt The official documentation doesn't (yet) indicate the degree in which...

The official firmware downloads can be found here: https://yk-lab.org:666/index.php/2020/01/02/shizuku-firmware/ Note that Shizuku firmware v1.00.62 seems to have a bug(?) that causes the elapsed time to advance 10 times as fast...

In the meantime, some more research is showing some potential issues with implementing current control in AVS mode, since it uses 100mV steps instead of PPS' 20mV. Support for QC3.0...

The requirement for SWD hardware will continue to be a challenge, but another researcher did come up with some software tools to help with editing the juice level: https://github.com/xbenkozx/RAZ-RE/tree/main/Flash%2Freflasher

The firmware extraction would be with the aforementioned SWD method (I just used my Segger J-Link with the J-Mem tool to grab 0x10000 (64k) bytes from address 0x08000000. The graphics...

Interesting... The Kraze variant uses the plain flame graphic for the boost mode.

I just went through some photos I took and the first Kraze HD Mega vape I found used the "tiger flames" boost mode graphic. Not sure when the change was...

As mentioned in Issue 5, I have found the correlation between versions. Holding the side button for more than 10 seconds will cause a version number to display, and a...