Kirk D. Benell

Hi @C1Ron , This is strange - Our latest take on this issue is that the clock on your board is defective - normally, the NTP sync happens every 60...

Did you ever get a replacement board to test? If not - send me an email kirk.benell at sparkfun.com and I'll get a couple sent to you for testing....

Hi @C1Ron - I'll see another board gets set to you for testing/validation the other one had issues. If the problem persists - which would be unexpected - we'll have...

Hi @C1Ron, Great news! Thank you for getting back to us on this. -Kirk

Hi @C1Ron , This is very confusing -NTP is working - at least initially - since the time stamp value is close to actual time. Looking at what we do,...

This is added to our next release backlog. The concept we have is that if a PPS signal is connected to a GPIO pin on the DataLogger, the detection of...

The timestamp the logging system uses is getting the time from the system (esp32 in this case). The GNSS device is logged also (if enabled) and outputs the time/date values...

HI @atabou, We would love to get to the point to support this - its a goal to provide an SDK/external access to the firmware framework we've developed. But we're...

We'll take a look at this for a future release - the implementation / integration of this library into the framework looks straightforward enough. As noted, the ROM/RAM could be...

Easy enough to add to a near term release Would you expect something like this? - external UART device connected to the TXD/RXD pins of the DataLogger IoT board -...