Deleted user
Deleted user
It doesn't have any.
It merely means it leaves seeking to the demuxer. In this context, demuxers are said to seek to keyframes, although that doesn't make very precise terminology, so the seek command...
you do not need to identify the brand those does not matter, only the mcu model number is important, the rest of work can be done by autodetect
only known board that have addressable led is 2.4.1 and 2.4.2
you will need to make sure your board is mm32spin05 or mm32spin06 i will supply you with the firmware needed and you need trace the serial pin your board have...
the marking is lasered off, i can still see 3 locating dimple in the chip, which match mm32spin, but it could be again a unknown chip the 5v header is...
i will compile blink code for mm32spin25 for you i already know your led is at pd2 pd3
if it worked ill add spin25 target to main firmware and send you autodetect+normal firmware
to flash mm32spin25, the step is confirmed to be the same as spin05 https://github.com/RoboDurden/Hoverboard-Firmware-Hack-Gen2.x/wiki/MM32SPIN05PF%E2%80%90Layout-2.8 incase the firmware i supply is wrong, you may need to unbrick your board at some...
if you ready tell me i have firmware now