digitalocean-debian-to-arch
digitalocean-debian-to-arch copied to clipboard
gh2o
Debian 11 Support
Modifying the script to support Debian 11 and then attempting to install Arch results in the following error with the system left in a broken state.
blk_update_request: I/O error, dev loop3, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class
blockdev: /dev/vda: Device or resource busy
The overall installation process ran smoothly so I don't think it would require much to get working. This was tested on the most basic droplet with an Ubuntu 21.10 image. While you can install an older image that works, I think it would be good to support Debian 11 now that there is quite a few images based on it.
Just in case, Ubuntu uses completely different partitioning layout, so don't even try. Debian 10 support is there, it's just not documented => https://github.com/gh2o/digitalocean-debian-to-arch/commit/96f8e450bc0165bc5ec8b34d9d68067e05930923#diff-043df5bdbf6639d7a77e1d44c5226fd7371e5259a1e4df3a0dd5d64c30dca44fR261
debian 11 errors though:
root@master:~# bash install.sh
[Tue Feb 14 20:04:04 UTC 2023] Configuration:
[Tue Feb 14 20:04:04 UTC 2023] - archlinux_mirror = http://mirrors.kernel.org/archlinux
[Tue Feb 14 20:04:04 UTC 2023] - extra_packages =
[Tue Feb 14 20:04:04 UTC 2023] - grub_timeout = 5
[Tue Feb 14 20:04:04 UTC 2023] - kernel_package = linux
[Tue Feb 14 20:04:04 UTC 2023] - mkfs_options =
[Tue Feb 14 20:04:04 UTC 2023] - target_architecture = x86_64
[Tue Feb 14 20:04:04 UTC 2023] - target_disklabel = gpt
[Tue Feb 14 20:04:04 UTC 2023] - target_filesystem = ext4
[Tue Feb 14 20:04:04 UTC 2023] *** ALL DATA ON THIS DROPLET WILL BE WIPED. ***
[Tue Feb 14 20:04:04 UTC 2023] Please backup all important data on this droplet before continuing.
[Tue Feb 14 20:04:04 UTC 2023] Type "wipe this droplet" to continue or anything else to cancel.
> wipe
[Tue Feb 14 20:04:08 UTC 2023] Cancelled.
root@master:~# bash install.sh
[Tue Feb 14 20:04:11 UTC 2023] Configuration:
[Tue Feb 14 20:04:11 UTC 2023] - archlinux_mirror = http://mirrors.kernel.org/archlinux
[Tue Feb 14 20:04:11 UTC 2023] - extra_packages =
[Tue Feb 14 20:04:11 UTC 2023] - grub_timeout = 5
[Tue Feb 14 20:04:11 UTC 2023] - kernel_package = linux
[Tue Feb 14 20:04:11 UTC 2023] - mkfs_options =
[Tue Feb 14 20:04:11 UTC 2023] - target_architecture = x86_64
[Tue Feb 14 20:04:11 UTC 2023] - target_disklabel = gpt
[Tue Feb 14 20:04:11 UTC 2023] - target_filesystem = ext4
[Tue Feb 14 20:04:11 UTC 2023] *** ALL DATA ON THIS DROPLET WILL BE WIPED. ***
[Tue Feb 14 20:04:11 UTC 2023] Please backup all important data on this droplet before continuing.
[Tue Feb 14 20:04:11 UTC 2023] Type "wipe this droplet" to continue or anything else to cancel.
> wipe this droplet
[Tue Feb 14 20:04:15 UTC 2023] Installing required packages ...
Get:1 http://deb.debian.org/debian bullseye InRelease [116 kB]
Get:2 http://security.debian.org/debian-security bullseye-security InRelease [48.4 kB]
Get:3 http://deb.debian.org/debian bullseye-updates InRelease [44.1 kB]
Get:4 http://deb.debian.org/debian bullseye-backports InRelease [49.0 kB]
Hit:5 https://repos-droplet.digitalocean.com/apt/droplet-agent main InRelease
Get:6 http://security.debian.org/debian-security bullseye-security/main Sources [185 kB]
Get:7 http://security.debian.org/debian-security bullseye-security/main amd64 Packages [226 kB]
Get:8 http://security.debian.org/debian-security bullseye-security/main Translation-en [147 kB]
Get:9 http://deb.debian.org/debian bullseye/main Sources [8634 kB]
Get:10 http://deb.debian.org/debian bullseye/main amd64 Packages [8183 kB]
Get:11 http://deb.debian.org/debian bullseye/main Translation-en [6240 kB]
Get:12 http://deb.debian.org/debian bullseye-updates/main Sources.diff/Index [15.1 kB]
Get:13 http://deb.debian.org/debian bullseye-updates/main amd64 Packages.diff/Index [15.1 kB]
Ign:13 http://deb.debian.org/debian bullseye-updates/main amd64 Packages.diff/Index
Get:14 http://deb.debian.org/debian bullseye-updates/main Translation-en.diff/Index [6117 B]
Get:15 http://deb.debian.org/debian bullseye-updates/main Sources T-2022-10-31-2015.41-F-2022-05-28-1407.13.pdiff [4199 B]
Get:16 http://deb.debian.org/debian bullseye-updates/main Translation-en T-2022-10-21-2017.32-F-2022-09-22-1635.40.pdiff [6025 B]
Get:15 http://deb.debian.org/debian bullseye-updates/main Sources T-2022-10-31-2015.41-F-2022-05-28-1407.13.pdiff [4199 B]
Get:17 http://deb.debian.org/debian bullseye-updates/main amd64 Packages [14.6 kB]
Get:16 http://deb.debian.org/debian bullseye-updates/main Translation-en T-2022-10-21-2017.32-F-2022-09-22-1635.40.pdiff [6025 B]
Get:18 http://deb.debian.org/debian bullseye-backports/main Sources.diff/Index [63.3 kB]
Ign:18 http://deb.debian.org/debian bullseye-backports/main Sources.diff/Index
Get:19 http://deb.debian.org/debian bullseye-backports/main amd64 Packages.diff/Index [63.3 kB]
Ign:19 http://deb.debian.org/debian bullseye-backports/main amd64 Packages.diff/Index
Get:20 http://deb.debian.org/debian bullseye-backports/main Translation-en.diff/Index [63.3 kB]
Ign:20 http://deb.debian.org/debian bullseye-backports/main Translation-en.diff/Index
Get:21 http://deb.debian.org/debian bullseye-backports/main Sources [399 kB]
Get:22 http://deb.debian.org/debian bullseye-backports/main amd64 Packages [394 kB]
Get:23 http://deb.debian.org/debian bullseye-backports/main Translation-en [329 kB]
Fetched 25.2 MB in 4s (5710 kB/s)
Reading package lists... Done
N: Repository 'http://deb.debian.org/debian bullseye InRelease' changed its 'Version' value from '11.3' to '11.6'
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
psmisc is already the newest version (23.4-2).
The following additional packages will be installed:
dmidecode libhavege2 libparted2
Suggested packages:
libparted-dev libparted-i18n parted-doc
The following NEW packages will be installed:
busybox dmidecode haveged libhavege2 libparted2 parted
0 upgraded, 6 newly installed, 0 to remove and 80 not upgraded.
1 not fully installed or removed.
Need to get 1119 kB of archives.
After this operation, 2151 kB of additional disk space will be used.
Get:1 http://deb.debian.org/debian bullseye/main amd64 libhavege2 amd64 1.9.14-1 [27.1 kB]
Get:2 http://deb.debian.org/debian bullseye/main amd64 haveged amd64 1.9.14-1 [39.6 kB]
Get:3 http://deb.debian.org/debian bullseye/main amd64 dmidecode amd64 3.3-2 [64.7 kB]
Get:4 http://deb.debian.org/debian bullseye/main amd64 busybox amd64 1:1.30.1-6+b3 [435 kB]
Get:5 http://deb.debian.org/debian bullseye/main amd64 libparted2 amd64 3.4-1 [335 kB]
Get:6 http://deb.debian.org/debian bullseye/main amd64 parted amd64 3.4-1 [219 kB]
Fetched 1119 kB in 0s (30.5 MB/s)
Selecting previously unselected package libhavege2:amd64.
(Reading database ... 25056 files and directories currently installed.)
Preparing to unpack .../0-libhavege2_1.9.14-1_amd64.deb ...
Unpacking libhavege2:amd64 (1.9.14-1) ...
Selecting previously unselected package haveged.
Preparing to unpack .../1-haveged_1.9.14-1_amd64.deb ...
Unpacking haveged (1.9.14-1) ...
Selecting previously unselected package dmidecode.
Preparing to unpack .../2-dmidecode_3.3-2_amd64.deb ...
Unpacking dmidecode (3.3-2) ...
Selecting previously unselected package busybox.
Preparing to unpack .../3-busybox_1%3a1.30.1-6+b3_amd64.deb ...
Unpacking busybox (1:1.30.1-6+b3) ...
Selecting previously unselected package libparted2:amd64.
Preparing to unpack .../4-libparted2_3.4-1_amd64.deb ...
Unpacking libparted2:amd64 (3.4-1) ...
Selecting previously unselected package parted.
Preparing to unpack .../5-parted_3.4-1_amd64.deb ...
Unpacking parted (3.4-1) ...
Setting up droplet-agent (1.2.4) ...
enable systemd service
Setting up libhavege2:amd64 (1.9.14-1) ...
Setting up busybox (1:1.30.1-6+b3) ...
Setting up dmidecode (3.3-2) ...
Setting up haveged (1.9.14-1) ...
Created symlink /etc/systemd/system/sysinit.target.wants/haveged.service → /lib/systemd/system/haveged.service.
Setting up libparted2:amd64 (3.4-1) ...
Setting up parted (3.4-1) ...
Processing triggers for initramfs-tools (0.140) ...
update-initramfs: Generating /boot/initrd.img-5.10.0-11-amd64
Processing triggers for libc-bin (2.31-13+deb11u2) ...
Processing triggers for man-db (2.9.4-2) ...
[Tue Feb 14 20:04:36 UTC 2023] Partitioning image ...
[Tue Feb 14 20:04:36 UTC 2023] Formatting image ...
mke2fs 1.46.2 (28-Feb-2021)
Discarding device blocks: done
Creating filesystem with 6144 1k blocks and 1536 inodes
Allocating group tables: done
Writing inode tables: done
Creating journal (1024 blocks): done
Writing superblocks and filesystem accounting information: done
mke2fs 1.46.2 (28-Feb-2021)
Discarding device blocks: done
Creating filesystem with 2619136 4k blocks and 655360 inodes
Filesystem UUID: 94de2bb8-cbbb-4d74-aba8-0a3680f8d90c
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
Allocating group tables: done
Writing inode tables: done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: done
[Tue Feb 14 20:04:41 UTC 2023] Mounting image ...
[Tue Feb 14 20:04:41 UTC 2023] Setting up DOROOT ...
[Tue Feb 14 20:04:41 UTC 2023] Downloading bootstrap tarball ...
--2023-02-14 20:04:42-- http://mirrors.kernel.org/archlinux/iso/latest/archlinux-bootstrap-2023.02.01-x86_64.tar.gz
Resolving mirrors.kernel.org (mirrors.kernel.org)... 139.178.88.99, 2604:1380:45e3:2400::1
Connecting to mirrors.kernel.org (mirrors.kernel.org)|139.178.88.99|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://mirrors.edge.kernel.org/archlinux/iso/latest/archlinux-bootstrap-2023.02.01-x86_64.tar.gz [following]
--2023-02-14 20:04:42-- http://mirrors.edge.kernel.org/archlinux/iso/latest/archlinux-bootstrap-2023.02.01-x86_64.tar.gz
Resolving mirrors.edge.kernel.org (mirrors.edge.kernel.org)... 147.75.199.223, 2604:1380:45d1:ec00::1
Connecting to mirrors.edge.kernel.org (mirrors.edge.kernel.org)|147.75.199.223|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 181986855 (174M) [application/x-gzip]
Saving to: '/d2a/bootstrap.tar.gz'
/d2a/bootstrap.tar.gz 100%[=========================================================================================================================================>] 173.56M 205MB/s in 0.8s
2023-02-14 20:04:43 (205 MB/s) - '/d2a/bootstrap.tar.gz' saved [181986855/181986855]
[Tue Feb 14 20:04:44 UTC 2023] Extracting bootstrap tarball ...
tar: Ignoring unknown extended header keyword 'LIBARCHIVE.xattr.security.capability'
tar: Ignoring unknown extended header keyword 'LIBARCHIVE.xattr.security.capability'
[Tue Feb 14 20:04:50 UTC 2023] Mounting virtual filesystems ...
[Tue Feb 14 20:04:50 UTC 2023] Binding packages directory ...
[Tue Feb 14 20:04:50 UTC 2023] Preparing bootstrap filesystem ...
[Tue Feb 14 20:04:50 UTC 2023] Installing base system ...
gpg: /etc/pacman.d/gnupg/trustdb.gpg: trustdb created
gpg: no ultimately trusted keys found
gpg: starting migration from earlier GnuPG versions
gpg: porting secret keys from '/etc/pacman.d/gnupg/secring.gpg' to gpg-agent
gpg: migration succeeded
==> Generating pacman master key. This may take some time.
gpg: Generating pacman keyring master key...
gpg: directory '/etc/pacman.d/gnupg/openpgp-revocs.d' created
gpg: revocation certificate stored as '/etc/pacman.d/gnupg/openpgp-revocs.d/36532A8D7523F45615D5E324FAD871F1E941CDD9.rev'
gpg: Done
==> Updating trust database...
gpg: marginals needed: 3 completes needed: 1 trust model: pgp
gpg: depth: 0 valid: 1 signed: 0 trust: 0-, 0q, 0n, 0m, 0f, 1u
==> Appending keys from archlinux.gpg...
==> Locally signing trusted keys in keyring...
-> Locally signed 5 keys.
==> Importing owner trust values...
gpg: setting ownertrust to 4
gpg: setting ownertrust to 4
gpg: setting ownertrust to 4
gpg: inserting ownertrust of 4
gpg: setting ownertrust to 4
==> Disabling revoked keys in keyring...
-> Disabled 34 keys.
==> Updating trust database...
gpg: marginals needed: 3 completes needed: 1 trust model: pgp
gpg: depth: 0 valid: 1 signed: 5 trust: 0-, 0q, 0n, 0m, 0f, 1u
gpg: depth: 1 valid: 5 signed: 94 trust: 0-, 0q, 0n, 5m, 0f, 0u
gpg: depth: 2 valid: 71 signed: 27 trust: 71-, 0q, 0n, 0m, 0f, 0u
gpg: next trustdb check due at 2023-04-21
:: Synchronizing package databases...
core 153.8 KiB 916 KiB/s 00:00 [########################################################################################] 100%
extra 1737.6 KiB 18.4 MiB/s 00:00 [########################################################################################] 100%
community 7.2 MiB 86.2 MiB/s 00:00 [########################################################################################] 100%
warning: base-3-1 is up to date -- skipping
:: Starting full system upgrade...
resolving dependencies...
:: There are 3 providers available for initramfs:
:: Repository core
1) mkinitcpio
:: Repository extra
2) booster 3) dracut
Enter a number (default=1):
looking for conflicting packages...
Packages (38) acl-2.3.1-3 bash-5.1.016-3 binutils-2.40-4 ca-certificates-mozilla-3.88.1-1 cryptsetup-2.6.1-1 dbus-1.14.6-1 diffutils-3.9-1 dnssec-anchors-20190629-3 e2fsprogs-1.47.0-1 file-5.44-2 filesystem-2023.01.31-1
gcc-libs-12.2.1-2 glibc-2.37-2 gnutls-3.7.9-1 grep-3.8-3 gzip-1.12-2 hwdata-0.367-1 iana-etc-20230105-1 iproute2-6.1.0-5 jansson-2.14-2 ldns-1.8.3-2 less-1:608-2 libcap-2.67-1 libedit-20210910_3.1-2
libelf-0.188-3 libnghttp2-1.52.0-1 libnl-3.7.0-3 libsysprof-capture-3.46.0-4 linux-api-headers-6.1.9-1 mkinitcpio-34-2 mkinitcpio-busybox-1.35.0-1 mpfr-4.2.0-3 openssl-3.0.8-1 sed-4.9-2 fakeroot-1.31-2
grub-2:2.06.r456.g65bc45963-1 linux-6.1.11.arch1-1 openssh-9.2p1-1
Total Download Size: 243.60 MiB
Total Installed Size: 505.74 MiB
Net Upgrade Size: 248.80 MiB
:: Proceed with installation? [Y/n]
:: Retrieving packages...
linux-6.1.11.arch1-1-x86_64 163.9 MiB 50.9 MiB/s 00:03 [########################################################################################] 100%
gcc-libs-12.2.1-2-x86_64 33.9 MiB 93.1 MiB/s 00:00 [########################################################################################] 100%
glibc-2.37-2-x86_64 9.9 MiB 98.8 MiB/s 00:00 [########################################################################################] 100%
binutils-2.40-4-x86_64 7.6 MiB 86.8 MiB/s 00:00 [########################################################################################] 100%
grub-2:2.06.r456.g65bc45963-1-x86_64 6.8 MiB 71.2 MiB/s 00:00 [########################################################################################] 100%
openssl-3.0.8-1-x86_64 5.1 MiB 60.7 MiB/s 00:00 [########################################################################################] 100%
gnutls-3.7.9-1-x86_64 2.8 MiB 35.2 MiB/s 00:00 [########################################################################################] 100%
bash-5.1.016-3-x86_64 1718.6 KiB 22.1 MiB/s 00:00 [########################################################################################] 100%
hwdata-0.367-1-any 1569.2 KiB 20.2 MiB/s 00:00 [########################################################################################] 100%
e2fsprogs-1.47.0-1-x86_64 1225.9 KiB 15.0 MiB/s 00:00 [########################################################################################] 100%
linux-api-headers-6.1.9-1-any 1225.1 KiB 15.7 MiB/s 00:00 [########################################################################################] 100%
openssh-9.2p1-1-x86_64 1124.6 KiB 13.7 MiB/s 00:00 [########################################################################################] 100%
iproute2-6.1.0-5-x86_64 1112.6 KiB 14.3 MiB/s 00:00 [########################################################################################] 100%
cryptsetup-2.6.1-1-x86_64 711.1 KiB 9.14 MiB/s 00:00 [########################################################################################] 100%
libelf-0.188-3-x86_64 549.6 KiB 7.06 MiB/s 00:00 [########################################################################################] 100%
ldns-1.8.3-2-x86_64 472.9 KiB 5.77 MiB/s 00:00 [########################################################################################] 100%
mpfr-4.2.0-3-x86_64 427.3 KiB 5.49 MiB/s 00:00 [########################################################################################] 100%
libnl-3.7.0-3-x86_64 409.3 KiB 5.26 MiB/s 00:00 [########################################################################################] 100%
iana-etc-20230105-1-any 395.2 KiB 5.08 MiB/s 00:00 [########################################################################################] 100%
file-5.44-2-x86_64 385.0 KiB 4.95 MiB/s 00:00 [########################################################################################] 100%
ca-certificates-mozilla-3.88.1-1-x86_64 354.3 KiB 4.55 MiB/s 00:00 [########################################################################################] 100%
diffutils-3.9-1-x86_64 344.3 KiB 4.42 MiB/s 00:00 [########################################################################################] 100%
dbus-1.14.6-1-x86_64 305.1 KiB 681 KiB/s 00:00 [########################################################################################] 100%
mkinitcpio-busybox-1.35.0-1-x86_64 275.0 KiB 2.31 MiB/s 00:00 [########################################################################################] 100%
grep-3.8-3-x86_64 230.0 KiB 2.81 MiB/s 00:00 [########################################################################################] 100%
sed-4.9-2-x86_64 210.7 KiB 2.71 MiB/s 00:00 [########################################################################################] 100%
acl-2.3.1-3-x86_64 136.2 KiB 1792 KiB/s 00:00 [########################################################################################] 100%
less-1:608-2-x86_64 121.7 KiB 1601 KiB/s 00:00 [########################################################################################] 100%
libedit-20210910_3.1-2-x86_64 110.8 KiB 286 KiB/s 00:00 [########################################################################################] 100%
libnghttp2-1.52.0-1-x86_64 95.2 KiB 1253 KiB/s 00:00 [########################################################################################] 100%
libcap-2.67-1-x86_64 85.0 KiB 1063 KiB/s 00:00 [########################################################################################] 100%
gzip-1.12-2-x86_64 81.1 KiB 422 KiB/s 00:00 [########################################################################################] 100%
fakeroot-1.31-2-x86_64 69.7 KiB 917 KiB/s 00:00 [########################################################################################] 100%
jansson-2.14-2-x86_64 51.7 KiB 172 KiB/s 00:00 [########################################################################################] 100%
mkinitcpio-34-2-any 47.4 KiB 494 KiB/s 00:00 [########################################################################################] 100%
libsysprof-capture-3.46.0-4-x86_64 45.4 KiB 568 KiB/s 00:00 [########################################################################################] 100%
filesystem-2023.01.31-1-x86_64 14.7 KiB 193 KiB/s 00:00 [########################################################################################] 100%
dnssec-anchors-20190629-3-any 3.0 KiB 39.4 KiB/s 00:00 [########################################################################################] 100%
Total (38/38) 243.6 MiB 32.4 MiB/s 00:08 [########################################################################################] 100%
(38/38) checking keys in keyring [########################################################################################] 100%
(38/38) checking package integrity [########################################################################################] 100%
(38/38) loading package files [########################################################################################] 100%
(38/38) checking for file conflicts [########################################################################################] 100%
(38/38) checking available disk space [########################################################################################] 100%
:: Processing package changes...
( 1/38) upgrading linux-api-headers [########################################################################################] 100%
( 2/38) upgrading iana-etc [########################################################################################] 100%
( 3/38) upgrading filesystem [########################################################################################] 100%
( 4/38) upgrading glibc [########################################################################################] 100%
Generating locales...
Generation complete.
( 5/38) upgrading acl [########################################################################################] 100%
( 6/38) upgrading sed [########################################################################################] 100%
( 7/38) upgrading gcc-libs [########################################################################################] 100%
( 8/38) upgrading bash [########################################################################################] 100%
( 9/38) upgrading file [########################################################################################] 100%
(10/38) upgrading e2fsprogs [########################################################################################] 100%
(11/38) upgrading openssl [########################################################################################] 100%
(12/38) upgrading libcap [########################################################################################] 100%
(13/38) installing fakeroot [########################################################################################] 100%
(14/38) installing grub [########################################################################################] 100%
:: Install your bootloader and generate configuration with:
$ grub-install ...
$ grub-mkconfig -o /boot/grub/grub.cfg
Optional dependencies for grub
freetype2: For grub-mkfont usage
fuse2: For grub-mount usage
dosfstools: For grub-mkrescue FAT FS and EFI support
lzop: For grub-mkrescue LZO support
efibootmgr: For grub-install EFI support
libisoburn: Provides xorriso for generating grub rescue iso using grub-mkrescue
os-prober: To detect other OSes when generating grub.cfg in BIOS systems
mtools: For grub-mkrescue FAT FS support
(15/38) installing dnssec-anchors [########################################################################################] 100%
(16/38) installing ldns [########################################################################################] 100%
Optional dependencies for ldns
libpcap: ldns-dpa tool [installed]
(17/38) installing libedit [########################################################################################] 100%
(18/38) installing openssh [########################################################################################] 100%
Optional dependencies for openssh
libfido2: FIDO/U2F support
x11-ssh-askpass: input passphrase in X
xorg-xauth: X11 forwarding
(19/38) installing mkinitcpio-busybox [########################################################################################] 100%
(20/38) installing jansson [########################################################################################] 100%
(21/38) upgrading libnghttp2 [########################################################################################] 100%
(22/38) upgrading ca-certificates-mozilla [########################################################################################] 100%
(23/38) upgrading libelf [########################################################################################] 100%
(24/38) installing binutils [########################################################################################] 100%
Optional dependencies for binutils
debuginfod: for debuginfod server/client functionality
(25/38) installing diffutils [########################################################################################] 100%
(26/38) upgrading grep [########################################################################################] 100%
(27/38) upgrading mpfr [########################################################################################] 100%
(28/38) upgrading cryptsetup [########################################################################################] 100%
(29/38) upgrading dbus [########################################################################################] 100%
(30/38) upgrading hwdata [########################################################################################] 100%
(31/38) upgrading libnl [########################################################################################] 100%
(32/38) installing mkinitcpio [########################################################################################] 100%
Optional dependencies for mkinitcpio
gzip: Use gzip compression for the initramfs image [installed]
xz: Use lzma or xz compression for the initramfs image [installed]
bzip2: Use bzip2 compression for the initramfs image [installed]
lzop: Use lzo compression for the initramfs image
lz4: Use lz4 compression for the initramfs image [installed]
mkinitcpio-nfs-utils: Support for root filesystem on NFS
(33/38) installing linux [########################################################################################] 100%
Optional dependencies for linux
wireless-regdb: to set the correct wireless channels of your country
linux-firmware: firmware images needed for some devices
(34/38) upgrading gnutls [########################################################################################] 100%
(35/38) upgrading less [########################################################################################] 100%
(36/38) upgrading gzip [########################################################################################] 100%
(37/38) upgrading iproute2 [########################################################################################] 100%
(38/38) upgrading libsysprof-capture [########################################################################################] 100%
:: Running post-transaction hooks...
(1/9) Creating system user accounts...
(2/9) Reloading system manager configuration...
Skipped: Running in chroot.
(3/9) Applying kernel sysctl settings...
Skipped: Running in chroot.
(4/9) Creating temporary files...
/usr/lib/tmpfiles.d/journal-nocow.conf:26: Failed to replace specifiers in '/var/log/journal/%m': Package not installed
/usr/lib/tmpfiles.d/systemd.conf:23: Failed to replace specifiers in '/run/log/journal/%m': Package not installed
/usr/lib/tmpfiles.d/systemd.conf:25: Failed to replace specifiers in '/run/log/journal/%m': Package not installed
/usr/lib/tmpfiles.d/systemd.conf:26: Failed to replace specifiers in '/run/log/journal/%m/*.journal*': Package not installed
/usr/lib/tmpfiles.d/systemd.conf:29: Failed to replace specifiers in '/var/log/journal/%m': Package not installed
/usr/lib/tmpfiles.d/systemd.conf:30: Failed to replace specifiers in '/var/log/journal/%m/system.journal': Package not installed
/usr/lib/tmpfiles.d/systemd.conf:32: Failed to replace specifiers in '/var/log/journal/%m': Package not installed
/usr/lib/tmpfiles.d/systemd.conf:33: Failed to replace specifiers in '/var/log/journal/%m/system.journal': Package not installed
(5/9) Reloading device manager configuration...
Skipped: Running in chroot.
(6/9) Arming ConditionNeedsUpdate...
(7/9) Rebuilding certificate stores...
(8/9) Updating module dependencies...
(9/9) Updating linux initcpios...
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 6.1.11-arch1-1
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [kms]
-> Running build hook: [keyboard]
-> Running build hook: [keymap]
-> Running build hook: [consolefont]
==> WARNING: consolefont: no font found in configuration
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating zstd-compressed initcpio image: /boot/initramfs-linux.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 6.1.11-arch1-1
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [kms]
==> WARNING: Possibly missing firmware for module: nouveau
==> WARNING: Possibly missing firmware for module: radeon
==> WARNING: Possibly missing firmware for module: amdgpu
==> WARNING: Possibly missing firmware for module: ast
==> WARNING: Possibly missing firmware for module: i915
-> Running build hook: [keyboard]
==> WARNING: Possibly missing firmware for module: xhci_pci
-> Running build hook: [keymap]
-> Running build hook: [consolefont]
==> WARNING: consolefont: no font found in configuration
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: qla2xxx
==> WARNING: Possibly missing firmware for module: qed
==> WARNING: Possibly missing firmware for module: bfa
==> WARNING: Possibly missing firmware for module: isci
==> WARNING: Possibly missing firmware for module: cxgb4
==> WARNING: Possibly missing firmware for module: csiostor
==> WARNING: Possibly missing firmware for module: qla1280
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: cxgb3
==> WARNING: Possibly missing firmware for module: advansys
==> WARNING: Possibly missing firmware for module: wd719x
==> WARNING: Possibly missing firmware for module: ums_eneub6250
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
[Tue Feb 14 20:05:37 UTC 2023] Configuring base system ...
Created symlink /etc/systemd/system/dbus-org.freedesktop.network1.service → /usr/lib/systemd/system/systemd-networkd.service.
Created symlink /etc/systemd/system/multi-user.target.wants/systemd-networkd.service → /usr/lib/systemd/system/systemd-networkd.service.
Created symlink /etc/systemd/system/sockets.target.wants/systemd-networkd.socket → /usr/lib/systemd/system/systemd-networkd.socket.
Created symlink /etc/systemd/system/sysinit.target.wants/systemd-network-generator.service → /usr/lib/systemd/system/systemd-network-generator.service.
Created symlink /etc/systemd/system/network-online.target.wants/systemd-networkd-wait-online.service → /usr/lib/systemd/system/systemd-networkd-wait-online.service.
Created symlink /etc/systemd/system/multi-user.target.wants/sshd.service → /usr/lib/systemd/system/sshd.service.
[Tue Feb 14 20:05:37 UTC 2023] Forcing fallback kernel ...
[Tue Feb 14 20:05:37 UTC 2023] Installing digitalocean-synchronize ...
==> WARNING: Cannot find the sudo binary. Will use su to acquire root privileges.
==> Making package: digitalocean-synchronize 2.7-1 (Tue Feb 14 20:05:38 2023)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Found digitalocean-synchronize.sh
-> Found digitalocean-synchronize.service
-> Found 90-dosync-virtio-no-rename.link
==> Validating source files with sha256sums...
digitalocean-synchronize.sh ... Passed
digitalocean-synchronize.service ... Passed
90-dosync-virtio-no-rename.link ... Passed
==> Extracting sources...
==> Entering fakeroot environment...
==> WARNING: Cannot find the sudo binary. Will use su to acquire root privileges.
==> Starting package()...
==> Tidying install...
-> Removing libtool files...
-> Purging unwanted files...
-> Removing static library files...
-> Compressing man and info pages...
==> Checking for packaging issues...
==> Creating package "digitalocean-synchronize"...
-> Generating .PKGINFO file...
-> Generating .BUILDINFO file...
-> Generating .MTREE file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: digitalocean-synchronize 2.7-1 (Tue Feb 14 20:05:39 2023)
==> Installing package digitalocean-synchronize with pacman -U...
loading packages...
resolving dependencies...
looking for conflicting packages...
Packages (1) digitalocean-synchronize-2.7-1
Total Installed Size: 0.01 MiB
:: Proceed with installation? [Y/n]
(1/1) checking keys in keyring [########################################################################################] 100%
(1/1) checking package integrity [########################################################################################] 100%
(1/1) loading package files [########################################################################################] 100%
(1/1) checking for file conflicts [########################################################################################] 100%
(1/1) checking available disk space [########################################################################################] 100%
:: Processing package changes...
(1/1) installing digitalocean-synchronize [########################################################################################] 100%
:: Running post-transaction hooks...
(1/2) Reloading system manager configuration...
Skipped: Running in chroot.
(2/2) Arming ConditionNeedsUpdate...
[Tue Feb 14 20:05:39 UTC 2023] Finishing up image generation ...
find: '/proc/5201/root': No such file or directory
[Tue Feb 14 20:05:39 UTC 2023] Creating block rearrangement plan ...
[Tue Feb 14 20:05:39 UTC 2023] The machine will now reboot.
[Tue Feb 14 20:05:39 UTC 2023] Check the console for errors if the machine is still unaccessible after a few minutes.
root@master:~# Connection to 137.184.100.69 closed by remote host.
Connection to 137.184.100.69 closed.
