Gennady Gurov
Gennady Gurov
**Describe the bug** When a negative ignition advance happens, it is reported as around -600 degrees advance **Hardware** - Board: uaefi **To Reproduce** Steps to reproduce the behavior: 1. Go...
Tooltip for "Use idle ignition table" enable/disable dropdown claims that extra ADVANCE will slow engine down, and extra RETARD will speed it up: `This activates a separate ignition timing table...
**Describe the bug** MSQ files produced by TS from rusEFI do not work in MegalogViewer **Hardware** - Board: uaefi - Engine info: 2jz-gte **To Reproduce** Steps to reproduce the behavior:...
**Describe the bug** It appears after some running, on the bench, dwell shows oscilations in duration consistent with a pattern: commanded dwell: 3.5 3.5ms -> 3.2ms -> 3.0ms -> 2.7ms...
**Describe the bug** unit was on a bench, at 7000 rpm, after some time it was noticed that ignition status led were not blinking the right pattern logic analyzer used...
**Describe the bug** "Force parking every restart" function of the stepper motor idle runs every MCU restart. This is only useful if MCU is powered from car first. Since we...
**Is your feature request related to a problem? Please describe.** There are currently inconsistent limits on coolant temperature limits applied to 3 After Startup Enrichment (ASE) = 100c Warmup Timing...
**Describe the bug** During "fast sync" (calling it this cause this is how i ran into this on the bench), that is , we're bringing system and syncing it from...
**Describe the bug** tractionAdvanceDrop does not update if VehicleSpeed stays static but AuxSpeed1 updates **Hardware** - Board: f767 nucleo - Engine info : dual arduino uno generating wheel speed **To...
**Describe the bug** With addition of reasonable compression waves, trigger decoder appears to lose sync after 4 revolutions **Hardware** - Board: stm32_mega - Engine info: bench-ardustim with compression waves 36-2...