Gennady Gurov

external generator off, internal one running   running, output signals match what it was with external generator

if that's my log, that's TS chugging at the start, check out SECL variable, it will do the same thing. maybe time does it too. it's an artifact of starting...

hmm, no secL variable ? there's gotta be something that ticks up from ecu monotonically...

reproduced with internal stim, will post artifacts in the morning

KEY "36-2-894" INTERESTING THING TO NOTE: once in this state, settings internal stim to 893 rpm = NO oscillations 894 = oscillations. overdwell does not tick up @ 893, and...

[2024-05-08_06.58.38-external-stim.zip](https://github.com/rusefi/rusefi/files/15247881/2024-05-08_06.58.38-external-stim.zip) enabling external stim in that stage still produces the same results. one thing to note, i've switched back to 36-2 for external stim, and consequentally internal stim. and wave...

https://rusefi.com/online/view.php?msq=1648 that was the tune with internal stim. it's also curtune.msq in the zip posted above with 893 vs 894 rpm separation

reproduced with engint_type 93 on a bare discover board:   [dwell_oscillations_discovery_engine_93.zip](https://github.com/rusefi/rusefi/files/15273869/dwell_oscillations_discovery_engine_93.zip) logic analyzer log, tune, and log in the zip ch2 and ch5 seem to be affected. runtime of...

engine 93 narrow tooth KEY: "5000-missing-4" Note sadDwell speed increases above 5000 [Session 1-increasing-partial-dwell.zip](https://github.com/rusefi/rusefi/files/15273961/Session.1-increasing-partial-dwell.zip) above a certain RPM, (5500 or so) there is an increasing dwell length of one of...

there are 2 log files, one that i started when i discovered the issue, that's the one with varying rpm, external stim 2nd log file is internal stim, i shut...